Defender Source Forum banner

1 - 18 of 18 Posts

·
Premium Member
Joined
·
13,696 Posts
Discussion Starter #1
Building a 97 NAS spec 90 and need to fund a few items and paint work.

Tithonus cage internal/external for three door/or softop-whole thing from a gel top ruck $1200
Perentie front/brushbar/winch bumper $450
5 door ribbed roof with roof sides-media blasted. Currently bare aluminum $650
5 spoke "Sport" alloys as came on some 95 RRC's and the 98 25th anniversay D1 LSE $300
Salisbury drum brake rear axle from 80's 110 $400 have a couple
110 3 door van/pick up/ soft top tub $700
110 van roof sides $400
galvanized fuel tank skids for D1's and later RRC's $50 ea
Range Rover classic LWB galvanized chassis $2000
Unique D1 LSE 25th Anniversary power seat leather interior-excellent condition $650
Defender military rear bumperettes- sand blasted and galvanized $75 pr have two pair
RHD 10 spline complete front axle assemblys $100 ea have several
1 piece Trialer tube front end for 90 or 110 $100
Borg Warner RRC tcases have 2 with good working viscous couplings $200 ea
RRC interior parts- ask
RRC white lower tailgate $200
RRC white bonnet $200
defender sway bars front or rear $50 ea
defender trans crossmembers round or rectangular blasted and galvanized $75 ea
self leveling units from County's no idea on condition 3 for $75
pair 90 rear quarter panel chequer plates $20
Bonnets with dents-great for trail trucks some are military $75 ea have 6-8
spare tire pocket for 90 or 110 pickup- fits 7.50. Recesses into rear wheel well and spare affix's to capping. $75
rhd dash parts from conversions- ask
v8 twin carb setup with manifold $200
edlebrock manifold and 4 bbl carb- on my 110 drove it today $385
rhd heaters $50 ea
clutch pedal assemblys left over from auto conversions have a bunch $35 ea
Defender frame tie down rings-originals that have been blasted and galvanized $10ea
Early narrow radius arms $10 ea
Tornado alloys $30 ea many
RRC twists grey in color $150 for a set of 4 2 sets avail
rostyle steel wheels $20 ea how many do you want ?
lt77 tunnels $60 ea
lt77 bulkhead adapters $40
lt77 floors $50 pair
1.6 lt230 $100
parting 3 D1's text with needs

Willing to ship, freight is on buyer. We have a trip to the Philly planned this month and will be @ Winter Romp in Feb. Can meet /assist with RURR within reason.

Trades possible for items we need like chassis a frame mounts, front inner fenders, anything Safari Gard, etc

Contact me via text or email [email protected] or 434.818.2591
First to pay is new owner, no licking or dibs. Paypal is the email address above. Unlike dad, i don't frequent this forum.

Don't contact or pm dad.
 

·
Premium Member
Joined
·
10,028 Posts
Yeah.
 

·
Premium Member
Joined
·
15,148 Posts
You are coming near me, toss a galvanized round trans crossmember for the NAS 110 in the truck. If you have the bolts/hardware all the better. ?. I think they are defender specific on 110/130 V8, but I don’t know. I’d also pay for two bonnet frames if you can get them galvanized since you have a stack of bonnets. If you have any new style clutch pedal boxes (with the spring on the assembly) I will take those galvanized. Ask your father for my number to text me if you don’t have it.
 

·
Premium Member
Joined
·
1,603 Posts
I'd be interested in the front and rear D90 sway bars, do they have mounting hardware my chance? Any idea when you will be passing by the Baltimore area so I could meet up with you?
 

·
Premium Member
Joined
·
3,267 Posts
Got an idea on the mileage on the Borg Warner boxes?
How was the viscous couplings tested?
 

·
Premium Member
Joined
·
13,696 Posts
Discussion Starter #6 (Edited)
Got an idea on the mileage on the Borg Warner boxes?
How was the viscous couplings tested?
Both were in the 150k range. We parted running/driving trucks.
One was purchased for its interior, the other its engine.

------ Follow up post added November 9th, 2019 09:52 PM ------

I'd be interested in the front and rear D90 sway bars, do they have mounting hardware my chance? Any idea when you will be passing by the Baltimore area so I could meet up with you?
Bushing brackets we have, used bushings and links are discarded. No plans to pass through the Baltimore area.
Defenders use the same swaybars as a D1.
 

·
Premium Member
Joined
·
6,375 Posts
galvanized trans cross member round galvanized will take
 

·
Premium Member
Joined
·
77 Posts
Finally got my password reset and logged in.
Galvanized round crossmembers offered are 80's ones, not the 90's V8 ones shaped for catalytic Y pipe-we use those.

Have sold one round crossmember. Everything still available.
I have responded to all who have sent me texts.

Adding to list:
Found a Tithonus soft top folded up on the shelf today. Will throw that in with the Tithonus cage and sell together.
 

·
Premium Member
Joined
·
6,375 Posts
thanks cant use it
 

·
Premium Member
Joined
·
13,696 Posts
Discussion Starter #12
Trip to Trevor's shop is on for tomorrow with truck and trailer.

Anyone interested in anything Trey's listed or anything large we may have, get in touch with Trey asap.

This run would be moving parts 4 states closer to the North East for anyone in that direction. Trey is open to trades.
He's in need of a good bit yet for his NAS 90 clone.
 

·
Premium Member
Joined
·
7,133 Posts
If you'd let me know sooner i coulda had those Safari Gard cranked arms ready. Oh well.
 

·
Premium Member
Joined
·
13,696 Posts
Discussion Starter #14
Bill, closest we will be to you is Harrisburg area. Running I85 to avoid N.Va, DC, Baltimore so no worries.
 

·
Premium Member
Joined
·
13,696 Posts
Discussion Starter #18
Trey hasnt checked this thread in 2-3 weeks. If you want something please contact him as per first post.
The tub is a 3 door van/pickup/softop tub as posted.We have no hcpu beds for sale
Trey traded the 1.6 to another shop here in Va for some small parts he needed but we have others.
 
1 - 18 of 18 Posts
Top