Defender Source Forum banner
1 - 20 of 24 Posts

·
Premium Member
Joined
·
499 Posts
Discussion Starter · #1 ·
I have two '95 LWB's arriving Wednesday. One is Alpine White and the other is Ardennes Green. Some parts are missing from each truck but they are mostly complete. One motor is good the other is gone. If you're looking for parts let me know.
 

·
Premium Member
Joined
·
499 Posts
Discussion Starter · #3 ·
No running boards. Alpine bonnet was not on the truck, it had a green one. The Ardennes green bonnet is really nice. I will send you photos of the DS rear quarter when the Alpine truck arrives.

I've never had any luck getting windshields out of '95's or DI's. I'll see what I can do for you but remember, even if I get one out, it's going to have to travel all the way across the country from CT!
 

·
Premium Member
Joined
·
3,513 Posts
Paul, will the window ecu's be the same as 95 D1? Need one. Thanks

Need a D1 95 air filter box complete as well
 

·
Premium Member
Joined
·
7,343 Posts
air tank, height sensors, door pull pockets,
 

·
Registered
Joined
·
81 Posts
Looking for the door trim pieces on the drivers side


If it’s gonna happen, it’s gonna happen out there!
-Cap’n Ron
 

·
Registered
Joined
·
3 Posts
Hello there! I'm interested in an instrument cluster surround (the "hard" part) and the wood grain around the HVAC. And if the holy grail of front speaker covers is available, always those. Oh and the electronic seat control buttons that snap on, passenger sides (not sure if they're different).
Thanks!
Jonathan
 

·
Premium Member
Joined
·
1,524 Posts
serpentine harmonic balancer, 3.9 or 4.2. you have my email. rovertech2....
 

·
Premium Member
Joined
·
499 Posts
Discussion Starter · #11 ·
Fuse box under dash if available.
I have several. Do you also need the MFU?

------ Follow up post added April 18th, 2018 12:43 PM ------

serpentine harmonic balancer, 3.9 or 4.2. you have my email. rovertech2....
I have a couple. I'll email you.

------ Follow up post added April 18th, 2018 12:44 PM ------

Hello there! I'm interested in an instrument cluster surround (the "hard" part) and the wood grain around the HVAC. And if the holy grail of front speaker covers is available, always those. Oh and the electronic seat control buttons that snap on, passenger sides (not sure if they're different).
Thanks!
Jonathan
I'll let you know what I have as soon as the trucks arrive. I'm waiting for them as I type this. They should both be here by later this afternoon.

------ Follow up post added April 18th, 2018 12:45 PM ------

Looking for the door trim pieces on the drivers side


If it’s gonna happen, it’s gonna happen out there!
-Cap’n Ron
I'll let you know as soon as they arrive. The trucks are currently in route.

------ Follow up post added April 18th, 2018 12:46 PM ------

air tank, height sensors, door pull pockets,
Neither truck had a functioning EAS but I'll see what condition the height sensors are in. My bet is the air tanks are going to be rusty but we'll see. Any good door pulls are yours.

------ Follow up post added April 18th, 2018 12:47 PM ------

Paul, will the window ecu's be the same as 95 D1? Need one. Thanks

Need a D1 95 air filter box complete as well
I have you covered with both the air filter box as well as the window lift ecu.
 

·
Premium Member
Joined
·
4,619 Posts
Do these LWBs still have their chrome bumpers?
A member here is searching for some.



.
 

·
Premium Member
Joined
·
7,836 Posts
I need a black front bumper and end caps for my '91

I threw a chrome bumper on the scrap trailer with the crush can covers air dam etc years ago, shame on me
 
1 - 20 of 24 Posts
Top