Defender Source Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
430 Posts
Discussion Starter #1 (Edited)
If anyone with original jump seats in a NAS could send me a couple of up close pictures of the bracket circled in the pic below, I'd greatly appreciate it.

I am installing Exmoor tip ups which are supposed to use the existing holes, but the brackets they sent don't seem to line up to the existing holes.
 

Attachments

·
Premium Member
Joined
·
887 Posts
Hang tight...

If anyone with original jump seats in a NAS could send me a couple of up close pictures of the bracket circled in the pic below, I'd greatly appreciate it.

I am installing Exmoor tip ups which are supposed to use the existing holes, but the brackets they sent don't seem to line up to the existing holes.
Give me a second to call one of my kids...but I hafta tell you, they don't align very well stock either. There is a shim...

KCD
 

·
Premium Member
Joined
·
887 Posts
Of course!! As an aside, if anyone has a better thought or picture how the stock NAS rear seats are supposed bolt to that bracket, kindly let me know! The seats brackets are literally about 3/4 of an inch too tall... KCD
 
1 - 7 of 7 Posts
Top