Defender Source Forum banner

1 - 20 of 33 Posts

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #1
For those of you who would like to add a sedimenter with a glass bowl, we have 6 more of these for $149 each + $12 shipping if anyone wants one. Fuel fitting options are 5/16 (8mm) or 3/8 (10mm). Has a top bleed fitting and a bottom drain. No plastic parts, all metal. Can be completely disassembled for cleaning. All seals are viton, so safe for bio-diesel.

Measures roughly 7" tall X 4" wide (not counting the right fuel fitting) which is the standard size.

Shipping via USPS Medium Flat Rate Box, $12.

For those of you worried about the possibility of the heat treated glass breaking, a replacement is currently $12.99.

These are best mounted between the fuel tank and filter and will trap water and particulate preventing it from getting to the fuel filter.

Send email or PM for payment and shipping info. if interested.
 

Attachments

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #2
5 available.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #3
4 available
$149 you pay shipping or free MAR delivery.
 

·
Premium Member
Joined
·
6,561 Posts
Rob, I'll take on of these (solid lick), but need to confirm size. Are you coming to URE?
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #6
Rob, I'll take on of these (solid lick), but need to confirm size. Are you coming to URE?
Planning on it if it isn't another weekend of pouring down rain.
what is your concern regarding size?
 

·
Premium Member
Joined
·
6,561 Posts
Planning on it if it isn't another weekend of pouring down rain.
what is your concern regarding size?
I have a Racor prefilter in the rear wheel well now installed by pendy, and he used aftermarket fuel lines. I'm not sure what size barbs to use, so i'll go measure later today.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #8
I have a Racor prefilter in the rear wheel well now installed by pendy, and he used aftermarket fuel lines. I'm not sure what size barbs to use, so i'll go measure later today.
Mark:
We can do 8 or 10mm easily.
Larger sizes will require some drilling and tapping.
 

·
Premium Member
Joined
·
6,561 Posts
I just looked at my racor. still not sure what the exact size is because it uses adapters, but the 10mm should be close to correct. i'll go with that.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #10
2 available.

$149 you pay shipping or free Uwharrie delivery.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #11
$149 you pay shipping or free Uwharrie delivery.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #12
$149 + shipping or free Uwharrie delivery.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #13
$149 + shipping or free Uwharrie delivery.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #14 (Edited)
$149 + $6 shipping anywhere in USA.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #15
$149 + shipping.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #16
$149 + shipping
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #17
$149 + shipping
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #18
$149 + shipping.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #19
$149 + shipping.
 

·
Premium Member
Joined
·
10,294 Posts
Discussion Starter #20
$149 each + $12 shipping
 
1 - 20 of 33 Posts
Top