defender 110 rear door bottom sill rusted

Could be PN AQR710020. Or MTC1039. Figure it out from here.

https://www.johncraddockltd.co.uk/l...ittings/mtc1039-mounting-angle-rear-body.html

if you mean the rear door lower seal holder, we've been using the stainless ones from SP 4x4 and like them

Uncle Douglas said:

if you mean the rear door lower seal holder, we've been using the stainless ones from SP 4x4 and like them

Click to expand...

I overthought this one...

PN AFP710120. Doug is right, can get stainless. If yours is rusty, good luck not breaking the screws during removal.

I got a new mild steel one from brit part and had it hot dipped. The old screws weren't ever coming out so I snapped the heads off and ground them flat.

Cleanup the seal area, paint then install new seal and retainer.

The ss one is probably easier, but I was getting good stuff dipped anyway so nbd

I should have used more accurate description...sorry. I meant the bottom of the back door is rusted not the sill on the body...well..it is rusted but not badly.
Bottom of the back door is pretty much wasted...not sure if anyone sells a lower half door skin or am I just going to have to look for a whole door?

You can rebuild or buy new. Whatever you want.

https://www.sp-4x4.com/DEFENDER_REAR_DOORS_s/107.htm