Defender Source Forum banner

Bonnet bushing different sizes?

1008 Views 18 Replies 9 Participants Last post by  BeachRunner110
I noticed that my bonnet bushing was broken so I replaced it with a spare I have on hand. I hear a nasty vibration coming from my hood and to deduced it was a loose bonnet bushing as it is wiggling in the bulkhead bushing holder. I checked its size and the diameter is smaller than the broken one it replaced and smaller than the opposite side. Are there multiple sizes/diameters of these bushes? I ordered #346849. All my spares are very loose in my 1991 110...
1 - 2 of 19 Posts
The loops on your truck are probably just stretched. Tap them with a rubber hammer until they fit nbd
  • Like
Reactions: 1
i tapped mine with a deadblow , tightened right up...not kidding !

if yours is super out of wack maybe cut some shims from SS shim stock, instead of tape?
1 - 2 of 19 Posts