Defender Source Forum banner

Bonnet bushing different sizes?

1010 Views 18 Replies 9 Participants Last post by  BeachRunner110
I noticed that my bonnet bushing was broken so I replaced it with a spare I have on hand. I hear a nasty vibration coming from my hood and to deduced it was a loose bonnet bushing as it is wiggling in the bulkhead bushing holder. I checked its size and the diameter is smaller than the broken one it replaced and smaller than the opposite side. Are there multiple sizes/diameters of these bushes? I ordered #346849. All my spares are very loose in my 1991 110...
1 - 1 of 19 Posts
I had one smaller than the one it replaced and I also had one where the slot was too deep so that one of the halfs would catch the bushing holder...thought I screwed something up so I put another one from the same batch. Figured it out after that one broke. Probably a slightly worn hinge and crap replacement part.
1 - 1 of 19 Posts