1981 Series III 109 6-cylinder IOE Frame Off
1 - 8 of 8 Posts
Thank you! It’s getting there. Have installed the cooling system and accessories and it’s running with such a sweet sound. Having a hell of time getting the clutch hydraulics to bleed properly but that’s this weekends task along with securing all the wiring and plumbing to the firewall and frame in the proper fashion.
![]()
Joined
·
15 Posts
Coming along nicely! I’m watching closely as I have a NADA 6 cyl Dormobile that will need a new frame shortly. It’s great to follow your progress.
Always like hearing what people think. I’ve been so focused on this for so long I don’t know what looks good anymore. But’s been fun!!!
Joined
·
12,200 Posts
The clutch will bleed a lot easier if you adjust it out all the way and then readjust after the air is out.
You may want to check out the Dorman clutch master conversion:
Dorman Clutch Master Cylinder Conversion Kit - Mechanical
You may want to check out the Dorman clutch master conversion:
Dorman Clutch Master Cylinder Conversion Kit - Mechanical
Work from this weekend. Matilda is coming together nicely.
As far as the door seals and tailgate seals are concerned…I’ve tried every brand and I don’t know how they are supposed to fit and allow any door to close. I made my own using an 80% memory foam with PSA adhesive on the back. This worked much better.
![]()
![]()
As far as the door seals and tailgate seals are concerned…I’ve tried every brand and I don’t know how they are supposed to fit and allow any door to close. I made my own using an 80% memory foam with PSA adhesive on the back. This worked much better.
1 - 8 of 8 Posts
