Defender Source Forum banner
signal
1-20 of 110 Results
Advanced
  1. Defender Technical Discussions
    Went through my manual and a quick internet search, and I can't seem to find any reference to how to get these wing/side signal lights/lenses out to replace bulbs, check wiring etc on a 1988 Defender (Land Rover 90 - ROW version). It has to be pretty simple, but I would rather not break or...
  2. Defender Technical Discussions
    I have a new to me 1988 Defender with LED turn lamps. When I activate the turn signals in either direction they all blink (Left and Right). I traced the issue back to the indicator idiot light in the instrument cluster. With this removed, the signals work properly. It doesn't seem that there is...
  3. Defender Technical Discussions
    Ok, previous owner replaced the stock bulbs with LEDs for the turn signals but they seem to be really dim then eventually get brighter the longer they are flashing. Im guessing they need a relay ? do I replace the factory flashing unit??
  4. For Sale - Parts
    Part PLF441 $40 shipped.
  5. Defender Technical Discussions
    I Noticed today that my left turn signal is misbehaving. When I push the turn signal for left turn, all 4 signals flash, like with hazard. I heard flasher relay clicking. No indicator idiot light flashing on dash. Switch to right turn, only right signals, flasher relays clicks normally, idiot...
  6. Defender Technical Discussions
    Hi there I just recently purchased a 1985 Defender ex-mod and yesterday while driving noticed my turn signal & emergency lights are not working. I'm having problems how to diagnose & what to look for, and also I was wondering if someone could tell me where I can find the fuse box . I found a...
  7. Defender Technical Discussions
    <i did a search but this topic is all over the place> Setup LED's installed in all rear turn signals - WiPac Adjustable Flasher installed (all from MudUK) the SVX style (which are actually Dun-Bri group lights, part #'s Below, same as the ECR "kit" in looks and have the correct connectors)...
  8. For Sale - Parts
    What you see is what you get. $24 including shipping via USPS medium flat rate box.
  9. Wanted
    Need ASAP. 2 Amber signal assembly's with wires. Will pay for quicker shipping. Would like to have before end of weekend! Thanks
  10. Defender Technical Discussions
    1987 D110 Turbo D. Turn signals do not work... Had the truck mostly apart down to the frame. I did not remove the the wiring harness from the chassis. All lights worked upon tear down. Truck is mostly back together now. I installed new lights all around. All lights work except the...
  11. Defender Technical Discussions
    My turn indicator light on the dash started blinking more quickly on one side so I removed the round amber lens cover to see if the bulb was bad on the side that was not working. When I did the bulb was no longer attached and was lying in the lens cover. I went to put it back but it does not...
  12. Defender Technical Discussions
    Hi, as noted above. How do I replace the bulb on the front bumper turn signal? Thanks in advance.
  13. Defender Technical Discussions
    hey guys, RRC question...on my 94 RRC, I just ordered a replacement turn signal stalk. It arrived today (Britpart not Lucas) and it's missing (what I believe to be) the ground wire lead. I went ahead and installed it, all works fine...curious if this is a bad idea though. I took the old one...
  14. Defender Technical Discussions
    I replaced the rear turn signals and tail lights on my ROW 110 with Wipac LEDs a while ago and was really happy with the lights. I was having issues with the front turn signals and decided to replace these as well. I replaced the right one and tested it. Everything worked OK so I replaced the...
  15. Defender Technical Discussions
    Failed inspection today. No rear left turn signal. Thought was simple as rear bulb out but new one does not light either. Front left bulb lights fine. Left turn signal indicator flashes super fast. Right turn indicator flashes normal with both bulbs on. Hazard switch works fine. Only...
  16. Defender Technical Discussions
    Sorry folks....another stupid question. What's the proper lokut part number for mounting the turn signals on a Defender 90? (Specifically, early UK spec) RTC3745? AFU2692? RTC3748? thanks in advance
  17. For Sale - Parts
    FOR SALE – New in box LED 95mm signal lamps (sized for 95’-97’ NAS trucks) I have a spare set of LED lamps that I likely won't be using, and could probably pass them on for a good deal. There are the 95mm-sized ones, as installed on the rear of 95 & 97 NAS D90s (and front of 97s), only LED...
  18. Defender Technical Discussions
    Folks - 1988 RHD 110 v-8 looking for a little help troubleshooting a turn signal issue. Turn signals quite - no noise, noise turn signals, no turn signal lamp on dash. NADA The fuse is fine (tail lights and fan work on same fuse). How can ? differentiate a flasher problem from a turn signal...
  19. Defender Technical Discussions
    So I've recently had an issue whereby when I flip the left turn signal, the hazards come on, when i flip the right signal, the hazards come on, and when i flip the hazard button, nothing happens. Concurrently, my horn no longer works. I've not much experience with electrical stuff, but I figured...
  20. Defender Technical Discussions
    Yesterday noticed my headlights work, but not my turn signals or any other lights on the exterior. The lights are newer LED. Need help from the forum on the top 3 steps to begin the troubleshooting process. I have already checked the fuses and they are fine. Not sure if this matters, but the...
1-20 of 110 Results
Top