Defender Source Forum banner
relay
1-18 of 108 Results
Advanced
  1. Defender Technical Discussions
    I’ve got a question for the forum. I bought my 1995 NAS D90 3 years ago. To the right of the fuse panel, there is a rats nest of relays and wires. Not sure what the relays are for, but my guess is the driving lights, but beyond that I don’t know. I hate them hanging there and want to relocate...
  2. Defender Technical Discussions
    I’ve installed stock electric windows with Disco switches on my 110 and was wondering what if any relay I need to use? I’ve done some searching and can’t find an answer.
  3. For Sale - Parts
    Bought from RDavisinVA, turns out I don't need it. I bought it for $80.00 shipped. $65 PPG and Shipped.
  4. Defender Technical Discussions
    I have a ex-MOD 110 Tithonus. Can you guys help me out with identifying what these are (with part numbers)? I included the relevant Military illustrated Parts manual section , but it isn't very clear with which is which. Thanks
  5. Defender Technical Discussions
    Hi folks, soliciting input to check my debugging process. I'm in the process of adding intermittent wipers to my '88 110. I've bought the intermittent wiper arm, harness, and programmable relay, and got it all wired up. The problem I'm experiencing is that, when in the intermittent wiper...
  6. For Sale - Parts
    YWB100820LG (Genuine Part) Fits: Discovery I | '96 - '99 Defender 90 | '97 Worked fine and as it should when removed. I replaced with new one but in the end, my problem was a bad ground elsewhere. $50 shipped
  7. For Sale - Parts
    $45 shipped. Removed from a 2012 rear door with heated glass. All connections in place.
  8. Defender Technical Discussions
    Hoping someone can help. I have an NAS '94 D90. I have a bad hazard light relay switch that causes both turn signals to flash when I use my turn indicator. I've been told the part is discontinued. Does anyone know of a source for this switch? Thanks.
  9. Defender Technical Discussions
    Where is the 'Fuel pump relay' located on my '94 NAS Defender? Also the Inertia switch. Many thxs, Ian
  10. Wanted
    Good day Everybody! I kindly ask you to help me with all relays (full set, used are ok too) on my puma defender cause the car burnt out. And I also looking for ALL sensors on gearbox and selector. BR IVAN.:icon_peace:
  11. For Sale - Parts
    Genuine flasher relay PRC8876 $10 shipped
  12. Defender Technical Discussions
    I am stumped. My 1999 TD5 starter clicks and does not turn over about 1 in 5 times I go to start it (and will then take 20+ key turns/clicks to turn over and start). I installed a new solenoid & starter unit, I sanded all the grounds, battery leads and checked the wires. Also switched out the...
  13. Defender Technical Discussions
    I don't have access to a manual.... Anyone know what goes in relay position #3? (could be a blank) Position #4 is headlamp... What model relay? I'm guessing just like the others nearby... .
  14. Defender Technical Discussions
    On my phone and search is a bit tough at the moment. Truck will crank, but no sputter. Fuel pump never makes it's priming sound when first turning ignition. I've checked the small fuse in the dash (#20). I've relaxed the relay once in the past 8 years, and had the fuel pump changed almost...
  15. Defender Technical Discussions
    I have a 1997 NAS Defender 90 and after changing/updating almost the entire fuel system it randomly won't start. It turns over strong but it does not get fuel. If I let it alone for about 8 hours it MAY start. I'm down to getting a new relay. The part number on the 1997 D90 NAS is YB10041C. I...
  16. Defender Technical Discussions
    After several hours of diagnosis of my 94 NAS D90 not starting I narrowed it to the fuel pump relay. There are two silver relays under the passenger dash, (photo 1). I replaced the right hand one with a "used" 5 pin relay and it made no difference. I put the old left hand one on the right...
  17. Defender Technical Discussions
    Hi, would like to get non-working horn back working pulled horn from a MB 300d. MB Horn works fine when attached to battery tho makes a clunk sound when wired through the 110. Would a relay be needed or is something else wrong Don't have a meter to test how much juice is going through wires.
  18. Defender Technical Discussions
    I'm installing a headlight relay and have a question... There seems to be a terminal block under the drivers seat (see pic). Can I use that as the positive and negative terminals (instead of hooking directly to the battery?). Also, the power cut off switch seems to do so by isolating ground...
1-18 of 108 Results
Top