I'm totally at a loss and so is my mechanic regarding some issues that I'm having with my clutch. Here's the work that's been completed thus far...
Installed a new master and slave cylinder
Installed a new clutch kit, pressure plate, and resurfaced the flywheel
Installed a new pitch fork and...
I'm having a clutch issue after installing a new master and slave. I've also bled the line a few times and am having problems engaging the gears. Clutch feels spongey when pressure is applied. Should I also replace the clutch? Any ideas or suggestions would be greatly appreciated.
I have clutch fluid leaking down my pedal draining onto my floor mats. Is this typically a faulty master or slave cylinder? Should I attempt to repair it myself? I can't engage the gears unless I actually start the vehicle in gear. Can I add additional brake fluid (DOT 4) and drive the...
Trying to make some room in the shop. Need to get rid of several items from my 86 110 2.5na
Rear benches-no bottom cushions
Brake servo and master cylinder-had front discs and rear drums
Clutch pedal and box
Manual steering box
Drivetrain-2.5na diesel with LT77 and 1.6 LT230...