Defender Source Forum banner
1-19 of 208 Results
  1. Wanted
    Looking for the NAS style snorkel with the intake that mounts on the wing. Let me know if you've got one you could part with. Thanks!
  2. For Sale - Parts
    Looking for a new or nearly new rear wheel carrier for my 2002+ D90SW. Part #2-SA50-02/7
  3. Defender Technical Discussions
    Looks like a group ISG either formed to continue the business Mantec | Quality Land Rover Accessories
  4. Wanted
    I would like to buy one single 30mm wheel spacer that will accomodate a 265/75/16 tire. As my spare tire carrier currently stands, the studs don't even make it to the lug holes. Don't want to buy a full set as I already have four on my truck. Thanks!
  5. Wanted
    Just a shot in the dark to see if anyone has one of these mantec snorkels for sale. For a 300tdi which exits on the RS of the vehicle.
  6. Defender Technical Discussions
    My Mantec carrier has been feeling a bit loose lately - pulled it apart to investigate. First sign of trouble was a wet rear door card. Pulling the card off, I found this crack in the backdoor letting in water: Removing the swing arm, the plate where it mounts has failed and cracked: I...
  7. For Sale - Parts
    Mantec raised air intake off a NAS truck of mine for sale. Its in decent shape and mostly complete, no under bonnet hose though. The flex hose needs repaired or replaced but i'm including it. What you see is what you get. $250 plus shipping via UPS I take paypal f&f.
  8. Smaller Projects
    I recently purchased a new Mantec Spare Tire Carrier and it didn't come with the three hinge backing plates. For clarification, I am talking about the backing plates go on the inside of the body capping and the rear crossmember that hold the swing away porting to the truck. The pictures on the...
  9. Wanted
    Looking for a mantec defender bumper to run my Zeon winch and mate up to my mantec steering guard. They are defunct, and RN has none...
  10. For Sale - Parts
    New still in original package, Genuine Land Rover Defender Soft Top Mantec Swing Away Spare Wheel Carrier, $500 plus shipping. These are designed for steel wheels, you may require a wheel spacer to use with alloy wheels
  11. For Sale - Parts
    Fits NAS trucks. I have also used one on my LHD 110 when it had the 200TDi installed. Mounted on the top of the fender and fit nicely, frankly better than they do on NAS trucks. This snorkel is mostly there. Missing one of the hoses that goes underneath, the rubber liners for the brackets...
  12. For Sale - Parts
    Used Mantec Snorkel removed from a 97 D90. Please see photos below that show condition. I do not have the engine bay hoses. Please note the hose connecting from the wing top to the virtical tube is completely functional, yet not the original. $275 plus shipping Pick up welcome
  13. For Sale - Parts
    Mantec Rock Sliders (ROCK SLIDERS w/JACK PT DEFENDER 90 BLACK, RNA1001 - Rovers North - Classic Land Rover Parts) Good condition overall.. Some scrapes along bottom side (have to bend down to see them) Rover North carries them new for $400 Asking $300 or best offer.. Local pick-up or RURR...
  14. Wanted
    Title says it all. Mantec no longer makes this bumper so I'd like to get a used one before I shell out the cash for the Rovers North version, which is probably much better anyway.
  15. For Sale - Parts
    Aluminum Defender Front Skid - Excellent used condition... No scratches on the aluminum. Very Rugged. Located South of Boston - $220 Rovers North - Classic Land Rover Parts-Page not found or URL has changed
  16. Smaller Projects
    I got some questions around the mantec spare install, so I figured I'd post some details here for other planning to tackle this on their own. On my NAS 1997 D90 SW... I started with instructions I found on a paddockspares blog. If you have a UK truck (assume same for ROW?), the blog should get...
  17. Wanted
    Looking to see if anyone has any used in good conditon Mantec rock sliders. I would also consider the regular plain style (no holes) too if anyone has those. Thanks
  18. For Sale - Parts
    $299 shipped CONUS Used on my previous Classic that was parted This has been sitting on a shelf for 5 years Very good condition Just needs a quick touch-up on the mounting brackets This is the same model used on the Camel Trophy .
  19. Smaller Projects
    Hi all, just finished installing the carrier and everything appears to be bolted on correctly. Here is question for other it normal that it now takes a little more force to open & close the door with the carrier (spare not yet on the carrier). For example, I'm able to keep the door...
1-19 of 208 Results