Defender Source Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 66 Results
  1. Pre - 2016 Defender Technical Discussions
    I have a new to me 97 NAS and today in testing the electrics I found both horns disconnected??? There are 2 connections available (1 per horn) but there are 3 wires, both purple in color. 2 of them are female connections that look to be put on the male connections on each horn but the 3rd...
  2. Pre - 2016 Defender Technical Discussions
    want to upgrade the pathetic horn the 110 has. Besides airhorns and train horn what are your suggestions?
  3. Pre - 2016 Defender Technical Discussions
    So about a year ago I jacked up my switch assembly when attempting to fix my ignition switch. Basically I broke the arm and my assembly went limp and wouldn't support itself in the normal position. So I purchased PLF346 a proline version that is $70 compared to $250 genuine from Rovers North...
  4. Pre - 2016 Defender Technical Discussions
    I need to replace my horn. I like the sound of NAS horns - purposeful and just the right sound when you tap-tap-tap the stalk... but should "upgrade" to a Hella dual horn or similar? Thoughts? I gotta admit: I'm leaning toward loud, as I'm not keen on getting rear-ended by texters. And I...
  5. Pre - 2016 Defender Technical Discussions
    1994 RRC LWB my door lock fuse is removed because when I put it in, the alarm horn repeatedly beeps. So I don't have auto door locks. Any help on starting the diagnosis will be greatly appreciated I have the RAVE but 1.) it's terribly difficult to read and 2.) looking at a wiring diagram is...
  6. Pre - 2016 Defender Technical Discussions
    Hi, would like to get non-working horn back working pulled horn from a MB 300d. MB Horn works fine when attached to battery tho makes a clunk sound when wired through the 110. Would a relay be needed or is something else wrong Don't have a meter to test how much juice is going through wires.
  7. Pre - 2016 Defender Technical Discussions
    Hi, Last summer I replace my turbo on my 300 Tdi for a hybrid turbo from Bell auto services and and since then the left bull horn is leaking and spurting black soot in the engine bay. I tried muffler ciment from Kleen Flo and lately some extra high temp silicone but it's still leaking. Any...
  8. Pre - 2016 Defender Technical Discussions
    So I am putting the finishing touches on my 200TDI swap. (87 90 LHD) Last night I was putting my front panel and radiator shroud on. Before I put my grill on I remounted and plugged in my horn. Went to test it, and no go. First I checked the fuse and noticed it was burnt out, so I replaced it...
  9. Pre - 2016 Defender Technical Discussions
    OK my windscreen wipers have suddenly decided not to work. First thought lets check the fuse box, second thoughts where is the bloody fuse box!!! Any suggestions on location for a fuse box on 1989 Land Rover Defender ROW 3.5 V8 would be appreciated. Any suggestions on fault finding for the...
  10. Pre - 2016 Defender Technical Discussions
    So I've recently had an issue whereby when I flip the left turn signal, the hazards come on, when i flip the right signal, the hazards come on, and when i flip the hazard button, nothing happens. Concurrently, my horn no longer works. I've not much experience with electrical stuff, but I figured...
  11. Series 1, 2, and 3 Technical Discussions
    Hey guys, can you recommend a horn. Mine is shot. Can't seem to find a LR option online… Thanks
  12. Pre - 2016 Defender Technical Discussions
    G'Day All, I'm facing Failed Electrics - Horn, Passing Lights, Clock, etc. No blown fuses located. However, when 12 VDC is jumpered from another source on the Rover to the clock everything works again. Wierd? Thank you in advance for your assistance! D90 NAS CA '97 (Soft-Top of Course)
1-12 of 66 Results
Top