Defender Source Forum banner
gas
1-18 of 430 Results
Advanced
  1. Defender Technical Discussions
    The fuel gauge on my 1988 ROW D90 is not working. With a full tank, when i put the key in accessory mode, the fuel needle moves a little bit showing there is about a 1/4 tank. When driving it shows it is dead empty, every time. Any troubleshooting advice? Thanks
  2. Defender Technical Discussions
    Need to replace these...after repairing my bulkhead...there were no gaskets actually. Are these made of paper or rubber? Something I could make if I knew the material. Seems a bit high paying 8 bucks for these from some of the vendors I see
  3. Defender Technical Discussions
    trying to locate these or just make my own. Dont have the originals so not sure if they are rubber or paper. Cant see paying 8 bucks plus for these. Anyone know what they are made of?
  4. Defender Technical Discussions
    Hi Folks, I was hoping I could get some advise on the condition on my head and if I should have it decked. It doesn't look to be warped at all when using the feeler gauges and thank god there are no cracks in between the valves. But, there are some scratches, some cracks in the hot spots and...
  5. For Sale - Parts
    defender 2.5l gas engine (17h) has 110k on it with lots of new parts. just moved back from overseas and putting my 300tdi back in. pics on request $1000 located in texas
  6. Defender Technical Discussions
    For those of you who have installed the TurboTechnics VNT turbo on a 200tdi Defender, should it be metal to metal where the downpipe mates to the turbo housing or is there need for a gasket or compound here? The kit didn’t come with a gasket and there’s no mention of one in the instructions.
    gas
  7. The Flea Market
    RockAuto now carries AJUSA parts! AJUSA is a leading international manufacturer of OE-quality automotive gaskets/sets, cylinder head bolt sets and hydraulic lifters. Like RockAuto, AJUSA is a family-owned company. They are now part of CRP Automotive which includes Continental, Pentosin and...
  8. Defender Technical Discussions
    Hi, I would like ask for some suggestion and experience. I just recently replaced the P Gasket on my 300 Tdi. It was an ordeal getting the water pump casing off the block since a bolt snapped and the rest was frozen in the old casing. I had to cut the bolt which them ruined the P gasket...
  9. For Sale - Parts
    We had a project switch gears from 300tdi to LS and need to sell off the package. 300tdi with unknown mileage but was running when removed. New complete clutch kit New cylinder head (COMPLETE) with new head bolts New crank and con-rod bearings New pistons, wrist pins, gudgeon clips New...
  10. Defender Technical Discussions
    Try to change head gasket(3 notch) , notice some piston marking on the head after light sanding , do I need to sand down more? Thanks.
  11. Wanted
    Going to replace the gas tank soon on my NAS 110 and read that it’s recommnded to replace the crappy steel skid stick skid with an Alloy one from SHP but don’t think they make it. Anyone know where I can get one to replace mine? Thanks in advance, Eddie
  12. Defender Technical Discussions
    Sorry folks...I am wondering - of those folks who have replaced the headgasket on their 200tdi or 300tdi with a composite type (Elring), how many miles do you have on your rebuild?
  13. For Sale - Parts
    All: $50 shipped to the lower 48. These things are over $120 new. PayPal gift preferred. Thanks, Paul.
  14. Defender Technical Discussions
    It appears the engine is seized. Its an unusual engine in a Defender but that is what it has in it. Doesn anyone know where to source one?
    gas
  15. Defender Technical Discussions
    Hi all, I'm just wondering, who has a gas 2.5l Defender? I've read about how they have crap power and get low 20's/high teens on mpg. I'm searching for a 110 and really want a TD of course. If you came across a good deal on a nice 110 but it was gas would you grab it or keep looking? What are...
    gas
  16. For Sale - Parts
    New, never used Defender windshield gasket, $60 plus shipping.
  17. Defender Technical Discussions
    Located the source of the ticking sound. Seems it's the all too common blown head gasket at the rear of the head. This job looks rather straightforward, but I need to know which gaskets are needed for the job. I've already bookmarked the 3 hole Elring head gasket. Intake/exhaust gasket is...
  18. Defender Technical Discussions
    When I bought my Defender, the inside of the gas cap was rusted. I didn't think much of it, and added it to the list of future projects. Eventually I replaced the cap with a new one much list this ebay listing. Within a few weeks the interior metal bits of the new cap were also rusted. The...
1-18 of 430 Results
Top