Search Results for ‘coil’

Truck is a 1995 NAS V8 with just over 100k on the clock. Has been running great until the other day when I experienced a loss of power and backfire/pop out of the intake when modestly accelerating away from a stop. Off the throttle, the engine immediately returned to a smooth idle. I was able to...

Does anyone make an aftermarket HD suspension kit or parts for the LR 4 yet? I’m asking for a friend who is using it for rally racing. Any help would be appreciated. Thanks!

I have had a coil fail and was wondering if anyone knew of a suitable replacement available at places like Advance, AutoZone, or OReilleys. Thanks!

I've been trying to troubleshoot an "engine-stumble-under-load" issue. One of the threads here suggested the coil may be the problem. I want to bench test the two coils I have to see if they are within spec. The first is a Bosch that was on the truck when I bought it. The second is a Lucas...

Hi folks, soliciting input to check my debugging process. I'm in the process of adding intermittent wipers to my '88 110. I've bought the intermittent wiper arm, harness, and programmable relay, and got it all wired up. The problem I'm experiencing is that, when in the intermittent wiper...

I was re-fitting the exhaust manifold and the stud backed out. It looks like the exhaust manifold stud sheared at one point, a helicoil was used to repair it and then the broken stud was reused. Attached photos of the hole, not great but it doesn't look like there is a sheared stud in there...

Hi Guys - 1994 NAS D90 - pretty much stock and freshly rebuilt. By rebuilt, I mean almost totally rebuilt... 3.9L, R380, LT230, new galvanized frame, new dizzy, new ignition barrel, new ignition amplifier, new alternator, new starter, all nice clean grounds, repaint, all new suspension...

What can j do to fix this. My coils keep blowing up. Yes I searched the site. I'm so frustrated. Mallory unilite dissy New plugs New wires Brand new coil as I keep blowing them Help? Sent from my iPhone using Tapatalk

Anyone undertake this kind of project on a defender? If so how would one deal with welding perches on a galvanized frame? Do they make kits for this type of conversion?

So my terrafirma medium duty fronts aren't going to cut it for my truck: 200tdi Bull bar 80lb spare on the hood 110 2door I called lucky 8 and they said that ome 767 front coils were the better uprated coil that won't have the excess rake that the lighter duty tf Springs are exhibiting...

Hi all. So I recently swapped out the distributor on the 94 D90 NAS. Went with a Mallory. I also got the other stuff that Mallory recommended for it including the ignition coil. It ran awesome for 2-3 weekend. Strong. Then out of nowhere it stalled and wouldn't restart. No spark coming...

Trying to solve a no start situation & when I opened up the access panel thru the top of the fender above my coil, I noticed that it was wired into what turns out to be a " Lumenition " electronic ignition conversion, which is made available for Series & D's thru 1985. Fwiw, the outward...

Gents, I have seen a few buildups on here using Designa coil chassis for Series vehicles. I am looking for information as to how the crossmember that supports the rear A-frame is designed on the 109 chassis. It looks like it sits within the frame instead of on top of it, due to the difference...