Defender Source Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-30 of 68 Results
  1. Pre - 2016 Defender Technical Discussions
    I was about to start rebuilding the rear axle on to my new chassis (Marsland) and found that the A-frame to chassis bushes will not fit. It seems that Marsland replaced the bolted on bush mount bracket (575616&575615) with a welded on mount. Looked at their web site and it says so, but also...
  2. Pre - 2016 Defender Technical Discussions
    Anyone know where to get or what kind of bushings are used for the center link in a Safari Gard three link? I got a worn out one and need to replace it. Thanks.
  3. Pre - 2016 Defender Technical Discussions
    Does anyone have any thoughts on polybush suspension kits vs. the LR genuine parts? I was considering the orange "standard" firmness. They seem to be a bit less expensive than the LR parts. thanks
  4. Pre - 2016 Defender Technical Discussions
    Why it's 13.95$ for one at Atlantic British and 59.95$ for a pair at RoversNorth ? I mean, none is stated as G and this is a huge difference.
  5. Pre - 2016 Defender Technical Discussions
    It looks like it is time for me to address the driveline angles resulting from the lift, now that the driveshaft decided it didn't like it. So my question is what is the difference between these two options in terms of final results? The bushings are about half the cost of the radius arms, but...
  6. Pre - 2016 Defender Technical Discussions
    I searched the forums and found nothing that directly addresses the questions I have. My 95 D90 ST just turned 100,000 miles, I recently noticed a clunking coming from the rear of the truck. I looked around back there, and I noticed my lower rear shock bushings on the passenger side had turned...
  7. Pre - 2016 Defender Technical Discussions
    I am about ready to replace alot of the bushings thru out the truck. What is the consensus on using Poly? Do they hold up to some pretty hard wheeling? Should I go with The Blue, Orange or the Red? Or should I just stay with OEM
  8. Pre - 2016 Defender Technical Discussions
    My 97 D90 lived up north for a couple years with a previous owner. As a result (I'm assuming) some of the bushings have turned to goo. Some are almost like tar and not providing any cushion. After taking it off-road - nothing serious, just in Florida - one time I could feel the difference in the...
  9. Series 1, 2, and 3 Technical Discussions
    Never changed the leaf/frame bushings on a leafer before. What do I need to know? What about poly-bushings? bad or good idea? thanks
  10. Pre - 2016 Defender Technical Discussions
    I'm going thru 2 sets of rear link bushings a year . Has anyone tried these Custom rear links from DAP . ------ Follow up post added July 14th, 2010 03:34 PM ------ Sorry for the big fonts , still not great with the computer .
21-30 of 68 Results