I've got a bad leak, that appears to be getting worse. It's at the throttle body. I just rebuilt/replaced the engine and had the wiring redone -- now this... I'm not thrilled with spending >$2,500 to have a shop R&R the pump.
I recently plumbed the fuel lines after replacing the engine. Could...
Before everybody piles on.... I have owned 110’s. I’m used to some roll but nothing like this.
My current SA 110 feels like the back end wants to pass the front end when at highway speeds. No single hand driving or cell phone conversations. Full time, two handed, full attention...
body Land Rover Defender td4
as seen on the pictures, no showroom condition
sold completely as seen on the pictures
located in Belgium, one hour away from calais
A build I was going down the road with has been postponed due to a legal battle. I have a complete 110 XS body and interior that I am selling. The dash, bulkhead and seatbox are NTO and the rest is not much older. Everything is torn down and in parts ready for a new build. Please feel free to PM...
Wings+elbow plates/bonnet/Rad panel/grill/half doors with door cards (Need handles)/bumper/tub (missing driver side panel and driver side rear panel). There is light corrosion at bottom of doors and where roll cage mounts on wings.
Would like to sell as a package to the right buyer but will...
I bit the bullet on a Astro rivnut gun and it came with a handful of zinc coated steel rivnuts.
I am going to be affixing my rear license plate with a pair of rivnuts (holes are existing so might as well) I am wondering if it makes sense to buy aluminum rivnuts (galvanic corrosion) vs using...
i just got a d110 that was rebuilt by the landrovers in the netherlands. its been quite an experience(some good, some frustrating) but i'll save those details for a later post. since i live in AK i had them install a webasto heater. its an airtop 2000stc for a diesel. it has the dash mounted...
Body panels from an '83 110 Hi Cap for sale
Door Lowers. Bottom part of frame has some rot. $250 shipped to lower 48
Wings w/ Vents - $500 shipped to lower 48
Front fender panels w/ flares - $250 Shipped
Or pick up in Birmingham, AL or Atlanta area.
I changed out my saggy front springs to the light duty Terrafirma +2" springs last night, and while doing so I took a few measurements. Without the stock shock connected, I had an easy 28" of extension from shock mount to shock mount. This is without the weight of having the other tire getting...
I'm swapping in a 200 tdi for my 12j and am considering using it as a "di" without the turbo. Has anyone else done this in their defenders? I know this is pretty common in the series vehicles but haven't heard of anyone doing it in defenders. (probably a reason for that)..
My reasoning would...
Day 1 of body-separation is in two weeks and I just wanted to get some input from those that have done a 110 before. How long did it take you to separate the body from the frame in terms of unscrewing, un-harnessing, unhooking, etc.? Is it unreasonable to think it could be done in something like...
Sold the project truck so I have these parts available for sale. I was going to build a 110 soft top but now that the donor vehicle sold these parts are extra to my needs
New NAS 110 Richards galvanized chassis. $3,500
Used rear 110 puma sw tub $3,500
New puma bulkhead $2,000
Used NAS soft...
I have a handful of defender and series body parts I've been hoarding. Have an upcoming move that is prompting me to thin the herd.
1. Used Defender Bulkead in good condition. Looks like it is from a 1993, given the lack of bulkhead vents and the holes for heater on the top of the...
We have removed a very nice condition Defender 110 Hicap RHD.
Not included is chassis, motor and axles. Body harness.
The tub and body are straight.
Doors. Decently straight.
Wing tops are not perfect. Some elbow dents.
Side wings perfect.
Tub. Straight , no dents.its...
This has been a great resource thus far and I'm hoping to find some guidance on a few things. I'm separating the body from the frame in a few weeks and I'm pretty nervous about it.
While they're separated, I want to work on the transfer case (getting a good bump due to slak on the...
I don't know if I'm searching wrong but I've searched for "frame mounting points", "mounting points", etc. and I can't find any other threads.
Does anyone know where I could find a diagram of all the mounting points for the body to the frame and any info on the order and list of things that...