Defender Source Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 251 Results
  1. Pre - 2016 Defender Technical Discussions
    Anyone able to point me to a source for only the rubber boots for the steering column indicator & wiper switches? Thanks!
  2. Pre - 2016 Defender Technical Discussions
    So I fired up my motor for the first time, ran great but it was pissing trans oil from the bellhousing. Like streaming not just a drop The trans is a rebuilt r380. I pulled it out this am and popped off the front cover. Once I took the bottom two bolts of the front cover order it started...
  3. Pre - 2016 Defender Technical Discussions
    Need to get the red dirt out of the blower assembly before my rebuild starts. Looking for advice on the best way to take it apart for cleaning. Shop diagrams look pretty straight forward but want to be safe before I start to dismantle it.
  4. Pre - 2016 Defender Technical Discussions
    Just now getting the plumbing squared-away after dropping-in the re-built 300 TDI. It's a long story, but I accidentally left the TDI fuel filter assembly in Germany. I'm in contact with the guy who has it, but I won't be back in Europe to pick it up until the end of the month -- and even then...
  5. Pre - 2016 Defender Technical Discussions
    So about a year ago I jacked up my switch assembly when attempting to fix my ignition switch. Basically I broke the arm and my assembly went limp and wouldn't support itself in the normal position. So I purchased PLF346 a proline version that is $70 compared to $250 genuine from Rovers North...
1-5 of 251 Results