Defender Source Forum banner
3-link
1-20 of 25 Results
  1. For Sale - Parts
    I purchased this 3-Link kit back when Greg Jevne was still running Safari Gard. My plan was to install it on my 110, but I only got as far as installing the crossmember. I've come to realize that I'll probably never get it fully installed so I removed the crossmember, and the kit is now for...
  2. For Sale - Parts
    So it has been fun but I have decided it may be time to let the 3 link go on to a new home.. Was going to chop it up to make it work with a toy hi pinion but I think I'll just sell it instead.. Not to mention I have been driving on the highway more often. Bought it not to long ago from Denny at...
  3. Wanted
    WTB- bushing set or source... -upper dash crash pad, perfect cond. -mantec snorkel clamps; (snorkel to roll-bar) thanks, Golden, CO.
  4. For Sale - Vehicles
    New Master Cylinder and front brakes and she stops well, so back on the market. 95 disco, 150K ish on body, less on running gear (PO put in 100K mile 3.9 5K miles ago) SafariGard 3 link with terraflex center link Detroit rear locker ARB front bumper with reinforced recovery points, tabs for...
  5. Defender Technical Discussions
    Ok so I got a 3-link kit...I decided I'll give it a try before getting too old. This kit was originally ordered to SG as "3-L kit for Tdi D90". I know because I did the order at time. I was quite sure it came with a V8 crossmember but, after 3 years, this is what I got yesterday...it's not a V8...
  6. Vendor Deals
    Complete sets of Bushings for your Safari Gard 3-Link. $65 per set $10 shipping for up to 4 sets. Pix on the way
  7. Vendor Deals
    A chat in the "wanted" section brought up the topic of Tdi 3-link cross-members. So we looked at the units we have in stock and the one we have in a 90 here that is here for repairs. Turns out the 3 units we have in inventory and the customers car all have incorrect cross-members in them...
  8. Wanted
    I know this is a long shot but I need one bad... I have a v-8 one to trade or sell in return. I just need the tdi version. If anyone has any Ideas, let me know. SG is basically not doing anything as of right now...
  9. Defender Technical Discussions
    Does anyone have the part # for the front radius arm to the frame bushings? THere are 4 of them and I need a set. I think daystar makes them but I need the # RANDY
  10. For Sale - Parts
    I have a welder ready to make up some 3-links. I might do a short run of 4 to 6. Who might be interested in buying one? I know price will be the main concern and I should be able to quote some prices this week once I hear back from him. I'm not looking to make money on them either, just looking...
  11. For Sale - Parts
    Selling my currently installed Safari Gard 3 Link and HD Cross Member. It is in very good shape with a few scratches along the bottom of the steering gard from making friends with rocks. All parts included to bolt up to your 90. The 90 is currently at Inland Rovers and should have the...
  12. Wanted
    Anyone have a source for 3-Link bushings? I know some people mentioned in the past that they had some extra sets on shelves but seem to be holding onto them. Need to replace the ones in my 3-link pretty soon.
  13. Defender Technical Discussions
    97 D-90 Station Wagon 3-link, 3 Inch Rovertym Springs, Heavy Duty Steering Rods, Sg Front External Shock Mounts, Rockware Rear Hoop Mounts, Sg Rear Heavy Duty Drive Shaft, Rovertym A-arm Extension, Rovertym Heim Jointed Pan Hard Bar, Gbr Front Heavy Duty Drive Shaft, 35 Inch Ssr, 12 Bilstien...
  14. Wanted
    Looking for a SG 3-link and crossmember for a D90
  15. Wanted
    Hello, I need a 3-link System. or if you know anyone is selling one let me know.
  16. Defender Technical Discussions
    I just replaced both 7/16 bolts used in the rockguard mount to diff housing. Both bolts had sheared off and the broken studs took some time to remove. To all with a SG 3-link please check your hardware . Symptoms , knocking sound ,clicking sound when brake is applied . Once again please check...
  17. Wanted
    I'm looking for a SG 3-link and a RRC crossmember, the people from SG said rrc's either have a straight crossmember or kindof a u-shaped one. I have the u shaped one on my 92' LSE.
  18. Defender Technical Discussions
    Does anyone know where I can possibly get one of these bushings other than through safari gard? Last time I ordered something from them it took its sweet time getting to me.
  19. Defender Technical Discussions
    Ok, sitting here thinking about the D90s and what I want to do, so lets start by diving into another 3-Link topic here that I really didn't pull answers to my questions to in previous discussions. The replacement D90 I bought, has a SG 3-Link on it already but the shocks and springs that were on...
  20. Defender Technical Discussions
    Does any body know's where to get a new bushings for the SG 3-link??
1-20 of 25 Results
Top