Defender Source Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 18 Results
  1. Pre - 2016 Defender Technical Discussions
    Finally getting the truck back together. Need an opinion on today's headache. Shown in the image, coolant is spitting out on the front, top of the head through a very tiny crack where the housing bolts to the head. I recently replaced that gasket, and am very careful to clean out bolt holes in...
  2. Pre - 2016 Defender Technical Discussions
    I have a 1992 Defender 90 with a 200TDI from a Discovery. When I bought this defender I didn't do enough research to know it was the wrong engine. VIN said it had a 200TDI, and it was, I just didn't know enough to spot it. Actually runs great, but my radiator is toast. I'm going to pull it out...
  3. Pre - 2016 Defender Technical Discussions
    I haven't driven my 1990 200TDI Defender on the highway in over a year. I took it out recently and its top speed was 60mph (usually 70 mph is not a problem) and it had a very subtle pulsing that I could feel. I spoke to a view local mechanics and they recommend getting the injectors tested...
  4. Pre - 2016 Defender Technical Discussions
    I have Rover repair shop in Phoenix Az. I am currently rebuilding 300tdi . The connecting rod bearings are different than any other tdi I have done. The locating/retaining notch on all 8 bearings I have done in the past where all on the same corner of the bearing, all 8 bearings were the...
1-4 of 18 Results
Top