Defender Source

Defender Source (http://www.defendersource.com/forum/)
-   For Sale - Parts (http://www.defendersource.com/forum/f9/)
-   -   Vintage Pintle Hook (http://www.defendersource.com/forum/f9/vintage-pintle-hook-36898.html)

Wolf Fabrication April 6th, 2012 02:56 PM

Vintage Pintle Hook
 
4 Attachment(s)
I am told this is a vintage Series pintle hook that I removed from my Series I. Of course I could be wrong and it's a cool paperweight. Either way, the mounting pattern appears to be 3 3/8" x 2 2/4". The jaw and latch work great and the surfaces are in good condition.

Let's play a game: Highest bid posted by 5pm EST on Monday gets it. I will add $12 postage to the final bid and it's yours.

diesel_jim April 6th, 2012 03:15 PM

Used by euro military, not UK though.

Wolf Fabrication April 6th, 2012 03:19 PM

Quote:

Originally Posted by diesel_jim (Post 341227)
Used by euro military, not UK though.

Good info. It was on an export ex-Argentine military/police 107 SW.

Jpayne April 6th, 2012 04:56 PM

Bolt pattern looks closer to 3 3/8 x 1 11/16, not 2 2/4

Wolf Fabrication April 6th, 2012 05:04 PM

Quote:

Originally Posted by Jpayne
Bolt pattern looks closer to 3 3/8 x 1 11/16, not 2 2/4

You're right. That's why the wife doesn't let me balance the checkbook.

woldd90 April 6th, 2012 05:56 PM

I will start at $5...

nathanwind April 6th, 2012 07:34 PM

$6.00

grnrvrs April 6th, 2012 08:15 PM

Wolf you may want to confirm that the pattern is the standard 3 3/8 x 1 3/4.

1 11/16 and 2 2/4 are both wacky.

grnrvrs April 6th, 2012 09:06 PM

Quote:

Originally Posted by JSBriggs (Post 341262)
Wouldn't 2 2/4 be the same as 2-1/2" in Merican?

-Jeff

One would think so.

ini88 April 6th, 2012 10:33 PM

$7.00

Fotogr4 April 6th, 2012 10:51 PM

Going out to measure my Series' bolt pattern now!

Wolf Fabrication April 6th, 2012 11:00 PM

Holy balls, I said I can't measure. I should have said 1 3/4".

Look at the tape measure for measurements.

It does not rotate.

ipgregory April 6th, 2012 11:15 PM

Quote:

Originally Posted by Wolf Fabrication (Post 341277)
Holy balls, I said I can't measure.

So if somebody wanted a rack from you for a 110, they should order one for a 90 and if they wanted one for a 90, they would be screwed? :grin

Wolf Fabrication April 6th, 2012 11:24 PM

Quote:

Originally Posted by ipgregory

So if somebody wanted a rack from you for a 110, they should order one for a 90 and if they wanted one for a 90, they would be screwed? :grin

Pretty much! :)

Bill Larson April 6th, 2012 11:38 PM

Quote:

Originally Posted by Wolf Fabrication (Post 341277)
Holy balls, I said I can't measure. I should have said 1 3/4".

Look at the tape measure for measurements.

It does not rotate.

funny stuff...$8.25.

aka rover April 7th, 2012 02:58 AM

Ok I'm sure it won't fit my rover but if I use a Mexican tape measure I'll be OK!!
So I'll go to 15.89 to keep that cheap Basturd who bids 15.51 from sniping my bid.

Wolf Fabrication April 7th, 2012 07:11 AM

1 Attachment(s)
Just confirmed the bolt pattern is 3 3/8" by 1 1 3/4". Or 3 frog legs, a button, and a piece of lint by 2 Legos and a penny.

nathanwind April 7th, 2012 10:59 AM

Quote:

Originally Posted by Wolf Fabrication (Post 341300)
Just confirmed the bolt pattern is 3 3/8" by 1 1 3/4". Or 3 frog legs, a button, and a piece of lint by 2 Legos and a penny.

My car gets 4 hogs head to the rod.

Wolf Fabrication April 9th, 2012 05:28 AM

Monday morning bump. Auction ends at 5pm EST tonight.

aka rover April 9th, 2012 05:37 AM

Ha looks like this jewel is mine:)


All times are GMT -5. The time now is 08:58 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.