Joined
·
17 Posts
Thank you for your reply
I am going with Radial Mounted calipers.
I am also looking to use 1.260-1.375" wide rotors, But the calipers are going to be Baer rather than AP. I have a pair of 6-piston calipers collecting dust, and all i would have to do is find the correct size rear calipers so not to over work the MC.
Front the center of the radial mounting bolts to the center of the brake pad area is 39mm. I feel i would also need to do a 30mm offset, Funny enough i also have a pair of 8-piston Brembo Calipers, but the replacement pads are very expensive.
So my options are open, i just need the correct supplier for the critical parts, like the Hats, rotors and radial mounts.
I am going with Radial Mounted calipers.
I am also looking to use 1.260-1.375" wide rotors, But the calipers are going to be Baer rather than AP. I have a pair of 6-piston calipers collecting dust, and all i would have to do is find the correct size rear calipers so not to over work the MC.
Front the center of the radial mounting bolts to the center of the brake pad area is 39mm. I feel i would also need to do a 30mm offset, Funny enough i also have a pair of 8-piston Brembo Calipers, but the replacement pads are very expensive.
So my options are open, i just need the correct supplier for the critical parts, like the Hats, rotors and radial mounts.