Originally Posted by 1of40
DJ, can i ask what GBR charges for a front CV and if you use an adapter or a DII flange, or neither?
Hmm, are you asking about a Contant Velocity Joint behind the hubs or a Dual Cardon Joint CV on the drive shaft? He sells both. Actually, he sells the driveshaft complete with the Dual Cardon Joint and adapter plate. I suppose you could make your own if you wanted. Jamie has a nice write up on it here
Oops. Sorry, that's for the rear shaft not the front. Still a good write up though.
In my case I only bought the Front Dual Cardon Drive Shaft. I think it was about $500 and included an adapter plate. Give him a call. He's always really helpful.