NAS 110 remains FS - Defender Source
Defender Source  

Go Back   Defender Source > Classifieds > For Sale - Parts


Reply
 
Thread Tools
  #1  
Old June 18th, 2009, 08:51 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
NAS 110 remains FS

The remains of a NAS 110 project, located in ME for sale. These are parts that are assembled as a rolling shell. It is not a complete vehicle, nor is it title-able or road ready, but it is a good jump on a 90 to 110 project for someone. A cage is not included (but if you buy the shell we'll cut you a good deal on a full SD 110 cage) and there is some rust, but if you had a nice D90 and these parts you would need very little more (other than lots of your time and some bits) to make your 90 into a 110 5 door. Images coming soon. Shell has: frame, front and rear axle (Salisbury drum), all suspension parts, 5 complete doors (with initerior trims, glass and all), roof, bulkhead, seat box, all floors, tub, complete heat and AC system, dash, cubby box, 5x NAS 110 steel wheels, hood, fenders, steering box, engine, LT77 gearbox, driveshafts, 1.4 ratio LT230 transfer case, etc etc etc.
$4000.
No day-dreamers.
This is a project for someone with a 90 to convert to a 110. If you are seriously dreaming about putting this 110 back on the road doing only minor work to it don't even bother to email me. This is a project with lots of good parts. It is not something you'll fix in a weekend. It is a collection of parts. There is no title and no other paperwork. If you email me about getting a title for it I won't even reply. Yes, harsh, but I have explained what is for sale clearly above.
email me at:
info at eastcoastrover.com
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old June 18th, 2009, 09:26 PM
budz
Status: Offline
sal gorriceta
various rovers
Member
 
Join Date: Sep 2004
Location: brooklyn, new york
Posts: 268
Mike,

Can I call you instead of email?

Thanks,

Sal
Reply With Quote
  #3  
Old June 18th, 2009, 09:48 PM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
Email sent.
__________________
*not legal advice*
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old June 18th, 2009, 10:07 PM
JimC's Avatar
JimC
Status: Offline
Jim Cheney
NAS 110 #145
Site Team
 
Join Date: Sep 2003
Location: Stuttgart, Germany
Posts: 7,154
Registry
Ron, I've got a trailer...
__________________
Jim Cheney

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old June 18th, 2009, 10:11 PM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
__________________
*not legal advice*
Reply With Quote
  #6  
Old June 18th, 2009, 10:17 PM
rover4x4's Avatar
rover4x4
Status: Offline
Phillip
1995 SW #487/500
Member
 
Join Date: Sep 2003
Location: The Old North State
Posts: 7,523
Registry
Youve got to many Rovers.
__________________
Poor gas mileage gets you to the best places on earth
Reply With Quote
  #7  
Old June 18th, 2009, 10:22 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by budz
Mike,

Can I call you instead of email?

Thanks,

Sal

email is better.

I have a basically all day meeting on Friday with the Elite AC guys, so I won't be available for the phone, but I will check my email before and after work.
If the rain isn't bad I'll get pictures posted in the morning.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #8  
Old June 18th, 2009, 10:29 PM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
Did you get my email(s)?

Follow-up Post:

Quote:
Originally Posted by rover4x4
Youve got to many Rovers.
Go away.

__________________
*not legal advice*
Reply With Quote
  #9  
Old June 18th, 2009, 10:31 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by evilfij
Did you get my email(s)?
I will when I get to the shop in the morning. I'm at home now with no access to that email account.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #10  
Old June 18th, 2009, 10:34 PM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
Ok, thanks. Put me first in line so to speak, pending pics.

Rover money burning hole in my pocket. BTW what is a good deal on a 110 cage, email me that number too pls.
__________________
*not legal advice*
Reply With Quote
  #11  
Old June 18th, 2009, 10:38 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by evilfij
Ok, thanks. Put me first in line so to speak, pending pics.

Rover money burning hole in my pocket.
OK, will do.
Its like the other one, but a little less complete (fewer trinkets), but the structural parts that are there are much better in this one.

I don't have prices on the roll cage stuff yet. Still working on conatiner costs and how many we can fit and all. I won't have those numbers for some time yet.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #12  
Old June 19th, 2009, 12:01 AM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
Ok sweet.

Follow-up Post:

re: 110 cage I took what you said as "we have them sitting here and we will give you a good deal so you can buy them together/pick it up at the same time and put a cage on it" no biggy that they are not in stock yet.
__________________
*not legal advice*
Reply With Quote
  #13  
Old June 19th, 2009, 12:59 AM
bjf's Avatar
bjf
Status: Offline
barry f
94 ST #395
Member
 
Join Date: Apr 2007
Location: los angeles
Posts: 10,958
I am confused. It sounds like a complete truck minus an interior for 4 grand? Did I miss something?
Reply With Quote
  #14  
Old June 19th, 2009, 01:08 AM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
"It is not a complete vehicle, nor is it title-able or road ready"

It has no title or vin and no cage.

NAS 110 title and cage = 30k (ask JimC )
Everything else = 4k
__________________
*not legal advice*
Reply With Quote
  #15  
Old June 19th, 2009, 01:53 AM
bjf's Avatar
bjf
Status: Offline
barry f
94 ST #395
Member
 
Join Date: Apr 2007
Location: los angeles
Posts: 10,958
come on, those parts are worth more than 4 k.
But yes title, cage, number on back 30k
Reply With Quote
  #16  
Old June 19th, 2009, 02:20 AM
evilfij's Avatar
evilfij
Status: Offline
evilfij
I have never seen a rover in person
Member
 
Join Date: Oct 2003
Location: on the internet
Posts: 14,688
Last one cost me 5k, this one is costing me 4k it seems I am sure this is not pristine either.

5k one

http://www.defendersource.com/forum/...ht=110+starter
__________________
*not legal advice*
Reply With Quote
  #17  
Old June 19th, 2009, 06:04 AM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by bjf
come on, those parts are worth more than 4 k.
Sorta depends on how you see it. If you never see 110s and think any piece is rare and worth huge money then it is worth more than 4K. If you are me and have over a dozen 110s on site and are swimming in used 110 parts... then its about 4Ks worth to make it actually sell. Sold piece by piece it would be worth more, but who has time for that.
I just tried to sell a mint condition 90 frame for only 1500. It only got 770. on ebay. That one I don't understand as someone will pay 3800 for a galv one, but not 1500 plus about 400 for a galv dip... Anyway, my point being stuff isn't worth much right now. If I sell something I price it to sell, not sit. But don't forget... we are the expensive place... right?
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #18  
Old June 19th, 2009, 09:41 AM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Pix sent Ron.
Let me know today, as the line forming behind you is seriously long.

Thanks,
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #19  
Old June 19th, 2009, 10:00 AM
budz
Status: Offline
sal gorriceta
various rovers
Member
 
Join Date: Sep 2004
Location: brooklyn, new york
Posts: 268
Mike, Im out as I bought this last night but I was busy at the floor reviving people's life. Ron get it!!!!

Sal
Reply With Quote
  #20  
Old June 19th, 2009, 10:30 AM
Wolf Fabrication's Avatar
Wolf Fabrication
Status: Offline
Sterling Archer
'08 D3
D-90 Source Vendor
 
Join Date: Sep 2007
Location: Oahu, HI
Posts: 7,453
Registry
pics to me pleeze: wolffabricationATgmailDOTcom
__________________
"The most unreliable car in the world is the most reliable car in the world." -Jeremy Clarkson refering to the Range Rover


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Semper Fi!
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Classifieds > For Sale - Parts

Tags
110, fs, nas, nas 110

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best way across the US Mike Hippert Defender Technical Discussions 173 April 29th, 2010 04:56 PM
NAS 110 Safety Devices cage "parts" FS ECR The Vendors Loft 2 December 3rd, 2009 09:58 AM
FS NAS 110 Stuff and OEM Speaker Grills surf110 For Sale - Parts 7 June 16th, 2009 12:32 AM
NAS 110 Rear Bumper Reefminis Wanted 3 October 2nd, 2006 04:54 PM
OD of NAS 110 cage needed dnewman9 Defender Technical Discussions 1 July 4th, 2004 01:24 AM


All times are GMT -5. The time now is 04:24 AM.


Copyright