Misc. Land Rover Parts - Page 4 - Defender Source
Defender Source  

Go Back   Defender Source > Classifieds > For Sale - Parts


Reply
 
Thread Tools
  #61  
Old May 8th, 2012, 01:35 PM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
Okay, here is the latest list of still-available stuff (thank you to everyone who have taken items already).

After much criticism by several in this forum, I've now put prices next to almost every remaining item (some are free for local pickup -- however, please DO NOT BITCH if the prices I've reluctantly put next to each item are not to your liking!!), and pictures of most of the stuff is already in this posting or shown below. If there's another picture that you want before deciding, let me know. Also, I would prefer local pick up, if possible.


1 new '97 NAS D90 stereo tray/bezel -- the fiberglass piece that goes in the cubby that the stereo mounts through. As shown below. $25 plus shipping.

1 new FCA101680L0Y center dash stereo pod - - the one you use to mount your stereo between the dash vents. As shown below. $25 plus shipping. New in the UK these are $55: http://www.brit-car.co.uk/product.php?xProd=97648

1 right rear ONLY 90 NAS Station Wagon rear speaker housing. Good shape, a few scuffs, no cracks. As shown below. $20 plus shipping.

Genuine LR3 rear loadspace mat. Barely used, like new (but dirty from storage). $40 plus shipping (HEAVY).

1 Genuine Series III grille. New. As shown below. $20 plus shipping.

NAS mechanical speedometer (so for NAS 110 or '94 or '95 D90s only), showing 6,191 miles, in original box, as new. $100 plus shipping. These are almost $600 at RN, and AB doesn't seem to show them anymore.

1 working ROW mechanical speedometer (Smiths). Reads in MPH, but has KPH shown in the inner ring (could have been from a NAS110 - - can't recall if they showed both MPH & KPH?). Odo reads 55,852 miles. $50 plus shipping.

4 sets of D90 springs. Cityside Garage took them off and replaced them with OMEs for me some years ago on a previous truck. They tagged each spring - - shown as "RF/LF/RR/LR - D90 4" lift." The springs were blue in color. I remember them as lifting the truck pretty high, so 4" is probably about right. ON HOLD - WAITING TO HEAR FROM GRANT

2 used Defender springs. I bit bigger diameter than the D90 ones shown above, so I'm pretty sure they came off a 110, not sure if they're front or rears. I can measure them if anyone could use them and is interested. ON HOLD - WAITING TO HEAR FROM GRANT

Used NAS 110 fan shroud. This is that big metal piece with the 2 round cutouts for the front fans. They ALWAYS rust out (in the Northeast anyhow). This one is intact, but the paint is starting to flake so could use sandblasting and repainting. Also have a single fan / motor to go with it. Anyone need this part? I know it's really hard to find when you're looking for it (which is why I bought this used spare when it came up). FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

Adjustable panhard rod for D90. Cityside Garage took it off a D90 I owned. Pics further up in this posting. FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

Brand new, genuine, in unopened wrapper rear (RH & LH) transmission cooler line for NAS D110. Part number ESR1933. $20 plus shipping. These are $58 from AB: http://www.roverparts.com/Parts/ESR1933G.cfm

New "max tool" head set in original green bag. No handle (went missing somewhere along the way). Has multiple heads, etc. for the tool, painted red. Anyone have any use for this? FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

Genuine Discovery II front and middle row rubber mats. Barely used, but dusty and dirty from sitting in basement. $30 plus shipping (SEMI-HEAVY).
Attached Thumbnails
Click image for larger version

Name:	D90 Bezel.jpg
Views:	64
Size:	143.7 KB
ID:	51246   Click image for larger version

Name:	D90 SW Rear Speaker Bezel.jpg
Views:	59
Size:	134.9 KB
ID:	51247  

Click image for larger version

Name:	Disco II Mats.jpg
Views:	57
Size:	247.5 KB
ID:	51248   Click image for larger version

Name:	Panhard Rod.jpg
Views:	59
Size:	85.3 KB
ID:	51249  

Click image for larger version

Name:	Series 3 Grille.jpg
Views:	67
Size:	192.9 KB
ID:	51250   Click image for larger version

Name:	Stereo Pod.jpg
Views:	79
Size:	114.5 KB
ID:	51251  

Reply With Quote
Sponsored Links
Advertisement
 
  #62  
Old May 8th, 2012, 01:37 PM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
Quote:
Originally Posted by red64chevelle View Post
Good meeting you last night. Thank you very much for the carb and other parts. Good luck with your gorgeous TD5.
Daniel, you're very welcome. Another officer and gentleman! I'm glad that the items are going to a good home and will be used. I really liked your ex-Saudi 110. Thanks for coming by.

-Mark
Reply With Quote
  #63  
Old May 8th, 2012, 05:33 PM
discotdi
Status: Offline
Todd Miller
Land Rover
Member
 
Join Date: Feb 2008
Location: Fairburn, GA USA
Posts: 1,029
FYI The LR3 mat will fit perfectly between the wheel wells in a 110. just trim the side pieces off. The side pieces are ready to cut with thin rubber. once done it looks factory. I have one in my 110 SW.
Reply With Quote
Sponsored Links
Advertisement
 
  #64  
Old May 8th, 2012, 05:56 PM
d90boy's Avatar
d90boy
Status: Offline
keith humphreys
aka: Mr Fancy Pants
Member
 
Join Date: Aug 2005
Location: Boston, MA
Posts: 3,228
Registry
about time you put prices!! =)
Reply With Quote
  #65  
Old May 8th, 2012, 06:29 PM
fishEH's Avatar
fishEH
Status: Offline
Brett Fritzler
94, 95, 96 D1's
Member
 
Join Date: Mar 2011
Location: Lake Villa, IL
Posts: 1,113
How much for a Recovery Kit?
Reply With Quote
  #66  
Old May 8th, 2012, 06:47 PM
bossman429's Avatar
bossman429
Status: Offline
Adrian
1988 90
Member
 
Join Date: Jul 2011
Location: Red Bank, NJ, USA
Posts: 1,416
Registry
MArk - I'll take the stereo dash pod

PM being sent with Address
__________________
1967 Series IIa 109 5 Door - Work in progress
'98 Toyota Land Cruiser 100 Series
Reply With Quote
  #67  
Old May 8th, 2012, 06:50 PM
SMac's Avatar
SMac
Status: Offline
Sam
NAS 97 D90 SW
Member
 
Join Date: Oct 2007
Location: Idaho
Posts: 1,766
Mark - $70 including shipping work? I'm at 31904. I'm guessing it would work in an LR4 as well...

I need a new bin for the center console on my D90, but yours with the stereo cutout looks different. Not NAS? My stereo surround looks to be a part of the entire center console.



Quote:
Originally Posted by mneil View Post
Here it is (a bit dirty from sitting in my basement - - but I had this truck all of 3 months and bought the loadspace mat myself new).

New these are $161.50 (and even more at RN):
http://www.landroversolon.com/sc/sto...p?idproduct=45

How about $40 plus shipping? Warning, this is a genuine LR mat, so it's HEAVY. Not sure how much shipping would be . . . .

-Mark
------ Follow up post added May 8th, 2012 06:51 PM ------

paypal?
Reply With Quote
  #68  
Old May 8th, 2012, 07:40 PM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
Quote:
Originally Posted by d90boy View Post
about time you put prices!! =)
You are such a smartass, Keith...gee thanks!!

-Mark

------ Follow up post added May 8th, 2012 07:44 PM ------

Quote:
Originally Posted by SMac View Post
Mark - $70 including shipping work? I'm at 31904. I'm guessing it would work in an LR4 as well...

I need a new bin for the center console on my D90, but yours with the stereo cutout looks different. Not NAS? My stereo surround looks to be a part of the entire center console.





------ Follow up post added May 8th, 2012 06:51 PM ------

paypal?
PM sent, Sam.

------ Follow up post added May 8th, 2012 07:45 PM ------

Quote:
Originally Posted by bossman429 View Post
MArk - I'll take the stereo dash pod

PM being sent with Address
PM'ed you back, Adrian.

Thanks,
Mark

------ Follow up post added May 8th, 2012 07:46 PM ------

[QUOTE=SMac;347407]Mark - $70 including shipping work? I'm at 31904. I'm guessing it would work in an LR4 as well...

I need a new bin for the center console on my D90, but yours with the stereo cutout looks different. Not NAS? My stereo surround looks to be a part of the entire center console.




Gee, I thought it was from a '97 NAS D90. Do you want me to take any measurements?

-Mark
Reply With Quote
  #69  
Old May 8th, 2012, 07:51 PM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
UPDATE - Parts still available

Latest updated list:

1 new '97 NAS D90 stereo tray/bezel -- the fiberglass piece that goes in the cubby that the stereo mounts through. As shown below. $25 plus shipping.

1 right rear ONLY 90 NAS Station Wagon rear speaker housing. Good shape, a few scuffs, no cracks. As shown below. $20 plus shipping.

NAS mechanical speedometer (so for NAS 110 or '94 or '95 D90s only), showing 6,191 miles, in original box, as new. $100 plus shipping. These are almost $600 at RN, and AB doesn't seem to show them anymore.

1 working ROW mechanical speedometer (Smiths). Reads in MPH, but has KPH shown in the inner ring (could have been from a NAS110 - - can't recall if they showed both MPH & KPH?). Odo reads 55,852 miles. $50 plus shipping.

Brand new, genuine, in unopened wrapper rear (RH & LH) transmission cooler line for NAS D110. Part number ESR1933. $20 plus shipping. These are $58 from AB: http://www.roverparts.com/Parts/ESR1933G.cfm

Genuine Discovery II front and middle row rubber mats. Barely used, but dusty and dirty from sitting in basement. $30 plus shipping (SEMI-HEAVY).

Used NAS 110 fan shroud. This is that big metal piece with the 2 round cutouts for the front fans. They ALWAYS rust out (in the Northeast anyhow). This one is intact, but the paint is starting to flake so could use sandblasting and repainting. Also have a single fan / motor to go with it. Anyone need this part? I know it's really hard to find when you're looking for it (which is why I bought this used spare when it came up). FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

Adjustable panhard rod for D90. Cityside Garage took it off a D90 I owned. Pics further up in this posting. FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

New "max tool" head set in original green bag. No handle (went missing somewhere along the way). Has multiple heads, etc. for the tool, painted red. Anyone have any use for this? FREE TO A GOOD HOME, WILL NOT SHIP, MUST BE PICKED UP LOCALLY

4 sets of D90 springs. Cityside Garage took them off and replaced them with OMEs for me some years ago on a previous truck. They tagged each spring - - shown as "RF/LF/RR/LR - D90 4" lift." The springs were blue in color. I remember them as lifting the truck pretty high, so 4" is probably about right. ON HOLD - WAITING TO HEAR FROM GRANT

2 used Defender springs. I bit bigger diameter than the D90 ones shown above, so I'm pretty sure they came off a 110, not sure if they're front or rears. I can measure them if anyone could use them and is interested. ON HOLD - WAITING TO HEAR FROM GRANT
Reply With Quote
  #70  
Old May 8th, 2012, 08:32 PM
KKilo23's Avatar
KKilo23
Status: Offline
Kenny
NAS SW l NAS ST l 110 SW | 110 Crew
Member
 
Join Date: Apr 2005
Location: Saratoga Springs, NY
Posts: 2,065
Registry
Quote:
Originally Posted by SMac View Post
Mark - $70 including shipping work? I'm at 31904. I'm guessing it would work in an LR4 as well...

I need a new bin for the center console on my D90, but yours with the stereo cutout looks different. Not NAS? My stereo surround looks to be a part of the entire center console.





------ Follow up post added May 8th, 2012 06:51 PM ------

paypal?

That stereo cutout is for a 97' NAS with the CD changer option. It replaces larger bin that comes standard.
Attached Thumbnails
Click image for larger version

Name:	CDNAS.jpg
Views:	71
Size:	28.3 KB
ID:	51294  
Reply With Quote
  #71  
Old May 8th, 2012, 08:44 PM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
Ah, great. Thanks for the clarification, Ken.
Reply With Quote
  #72  
Old May 8th, 2012, 08:51 PM
KKilo23's Avatar
KKilo23
Status: Offline
Kenny
NAS SW l NAS ST l 110 SW | 110 Crew
Member
 
Join Date: Apr 2005
Location: Saratoga Springs, NY
Posts: 2,065
Registry
Quote:
Originally Posted by mneil View Post
Ah, great. Thanks for the clarification, Ken.
No problem!
Reply With Quote
  #73  
Old May 8th, 2012, 08:54 PM
rijosho's Avatar
rijosho
Status: Offline
Joshua
1995 Black ST - Rhinolined edition
Research Assistant/Eagle Eyes
 
Join Date: Apr 2009
Location: NYC
Posts: 16,557
Registry
It's actually a sick deal if you still have a need for the cutout, as ECR (the only manufacturer of them at this point as far as I know) is selling the "standard" one that Ken mentioned without the cutout for $130+ right?
__________________
Quote:
I am talking purely from an aesthetics standpoint.
Reply With Quote
  #74  
Old May 8th, 2012, 10:04 PM
giftshopduane
Status: Offline
Chris luciano
72 Series 3 88"
Member
 
Join Date: Apr 2012
Location: Shirley MA
Posts: 336
Finally!....Mark

C
Reply With Quote
  #75  
Old May 10th, 2012, 07:08 AM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
Updated list of still-available items:

1 new '97 NAS D90 stereo tray/bezel for CD option -- the fiberglass piece that goes in the cubby that the stereo mounts through, reduces size of storage bin to add ability to mount a CD player/changer. As shown in pics. $25 plus shipping.

1 right rear ONLY 90 NAS Station Wagon rear speaker housing. Good shape, a few scuffs, no cracks. As shown in pics. $20 plus shipping.

NAS mechanical speedometer (so for NAS 110 or '94 or '95 D90s only), showing 6,191 miles, in original box, as new. $100 plus shipping. These are almost $600 at RN, and AB doesn't seem to show them anymore.

1 working ROW mechanical speedometer (Smiths). Reads in MPH, but has KPH shown in the inner ring (could have been from a NAS110 - - can't recall if they showed both MPH & KPH?). Odo reads 55,852 miles. $50 plus shipping.

Brand new, genuine, in unopened wrapper rear (RH & LH) transmission cooler line for NAS D110. Part number ESR1933. $20 plus shipping. These are $58 from AB: http://www.roverparts.com/Parts/ESR1933G.cfm

Genuine Discovery II front and middle row rubber mats. Barely used, but dirty from sitting in basement. $30 plus shipping (SEMI-HEAVY).

Used NAS 110 fan shroud. This is that big metal piece with the 2 round cutouts for the front fans. Intact, but paint is starting to flake so could use sandblasting and repainting. FREE, LOCAL PICK UP ONLY

New "max tool" head set in original green bag. No handle (went missing somewhere along the way). Has multiple heads, etc. for the tool, painted red. Anyone have any use for this? FREE, LOCAL PICK UP ONLY
Reply With Quote
  #76  
Old May 10th, 2012, 07:57 AM
giftshopduane
Status: Offline
Chris luciano
72 Series 3 88"
Member
 
Join Date: Apr 2012
Location: Shirley MA
Posts: 336
Mark..... put the Disco II mats aside for me too!

thanks
Chris
Reply With Quote
  #77  
Old May 10th, 2012, 08:16 AM
mneil
Status: Offline
Mark Neil
ROW D90 SW (TD5)
Member
 
Join Date: Apr 2012
Location: Westborough, MA
Posts: 97
You got it, Chris.

Thanks,
Mark
Reply With Quote
  #78  
Old May 10th, 2012, 06:11 PM
SMac's Avatar
SMac
Status: Offline
Sam
NAS 97 D90 SW
Member
 
Join Date: Oct 2007
Location: Idaho
Posts: 1,766
Thanks! My truck obviously came without that option, but the PO did cut the bottom out of my bin for some electronic gadget. What could I fit in the CD changer hole that would fit under the lid? I can't imagine a CB would with the protruding dials?

Quote:
Originally Posted by KKilo23 View Post
That stereo cutout is for a 97' NAS with the CD changer option. It replaces larger bin that comes standard.
Reply With Quote
  #79  
Old May 10th, 2012, 06:13 PM
Gt3454
Status: Offline
Grant Turpin
2000 Disco II
Member
 
Join Date: Dec 2008
Location: Deerfield NH
Posts: 16
I'll check out the Max Tool when I come get the springs and tires if you don't mind?

Sent you an email, let me know if your around tonight. (Email me, don't post here)
Reply With Quote
  #80  
Old May 11th, 2012, 07:40 PM
Gt3454
Status: Offline
Grant Turpin
2000 Disco II
Member
 
Join Date: Dec 2008
Location: Deerfield NH
Posts: 16
Thanks for the springs/tires Mark, sorry I didn't get to see your truck!

Maybe next time
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Classifieds > For Sale - Parts

Tags
part, parts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Misc Parts For Sale harrellee For Sale - Parts 2 May 19th, 2006 10:48 PM
Misc. Parts for sale tbutzow For Sale - Parts 21 April 3rd, 2006 09:16 AM
Misc. 97SW Parts for Sale 1of40 For Sale - Parts 10 March 18th, 2006 07:57 PM
Misc parts for sale NASD90 For Sale - Parts 9 December 8th, 2005 08:01 AM
1997 Bestop Soft Top Like New & Misc Parts Adam Armendariz For Sale - Parts 16 December 8th, 2005 01:43 AM


All times are GMT -5. The time now is 12:01 PM.


Copyright