I have a LHD dash horded away that I am looking to sell. This is pretty much a complete top and bottom pre 2002 set up. This includes all of the hard to find parts: heater controls, grab handle, cowl stiffener, wiper cover, etc. I am also including a RHD heater in great condition that can be converted to LHD inexpensively (see post http://www.defendersource.com/forum/...eferrerid=3511
) The heater is not listed below but is in great shape with a fairly new core and seals. $1750 for all plus shipping Ė not willing to split up.
Below is a list of parts included. Part numbers are for reference only; I might have old or incorrect numbers listed. I will also list the few dash parts I know of that are not included.
Here are the important parts for a RHD to LHD conversion:
MUC7599, Stiffener for Binnacle New
UTP1125 Blower Control New
MTC4618LDQ, Fascia Used, Seems fine, no cracks
MTC2827, Lower Dash Used, See comments below
MTC6142 Grab Handle Used, Seems fine
MTC6080 Wiper Cover Used, cut in skin under speaker hole
FBS000430 Closing Panel Used, Installed on lower dash
347586 Heater Control Used, Seems fine
MWC9339PMA End Cover Used, Seems fine
MTC5459 Instrument PanelUsed, Tabs gone, wrkd for me but rough, gauges not included, photo shows installed
MTC6006 Sticker Used, Installed on panel, silly to list this - I know
MTC6007 Sticker Used, Installed on panel
MRC7283 Tray Used, Seems fine (not the one in the photo)
MXC8573 Bulkhead Plate Used, this was a RHD plate, converted to LHD
MTC6167 Finisher / cap trimNew
Other parts included:
You donít necessarily need these if you have a RHD dash
Crash pad MXC6084PMX Used, Seems fine
2xMRC9669 Demister Nozzles Used, Seem fine
2xBTR912 Demister Finishers Used, Seem fine
2x346576 Vent Controls Used, Seem fine
MTC2808 Cowl Used, chunk missing, might not be usable
346786 Instrument cover Used, Seems fine
Known dash parts that are not included (could be others but I think this is complete)
You donít need these if you have a RHD dash
All mounting screws, bolts, etc.
MUC1584 center dash plate $8 at LRDirect
395829 & 30 air flow directors $2 at LRDirect
MTC6362 tube for demister $3 at LRDirect
Fuse box or cover
I was planning on using all of these parts myself. Before I put the lower dash into storage I rust treated the interior, reinforced the lower edge, and gorilla taped the back side lower edge to keep the plastic cover tight to the back of the dash shown in photos (the original glue had started to come loose). The lower dash has a toggle switch mounted and 4 small bolts where someone hung a CB and also has a few scuffs and dings. The wiper cover has 2 slices in the skin on the lower portion below the speaker which you donít really notice when installed; it also has some corrosion on the back but is plenty strong (photo of inside included here). The plastic fascia has a small amount of blue overspray on one edge. The bulkhead plate was RHD originally and is the only converted part on the list above.
If you are looking for perfection and have the means buy these same parts new from Safari HP for $6200 (although I think they only include the conversion parts). If you donít need perfection this may be a good option for you. None of the used parts are perfect but are in working order unless noted otherwise above. PM with any questions or for more photos.