FS - More Defender Parts/Accessories - Defender Source
Defender Source  

Go Back   Defender Source > Classifieds > For Sale - Parts


Reply
 
Thread Tools
  #1  
Old December 4th, 2008, 12:48 PM
Stmpede's Avatar
Stmpede
Status: Offline
Andrew Najarian
'93 NAS D110 #43
Member
 
Join Date: Mar 2007
Location: Jacksonville, FL
Posts: 2,459
FS - More Defender Parts/Accessories

Ok, I still have some of the previous stuff, which can be found in this thread. Please make offers on any of that stuff. The worst I can say is no, but I need to move this stuff. Also, may be interested in trades for other parts. Let me hear what you've got...

Additionally, I have

A couple (2) fuel gauges available. $25/ea

Temp Gauge AMR2631 (the D90 one used to replace the 110 one). It has a small mark in the lens to the left of the temp symbol, but below the actual needle/gauge part. You should be able to see it in the pic. $25

NAS D110 Temp Gauge $10

KPH Speedo $10

Fog Light Switch. This is a rocker to fit the wiper motor cover and give a more factory appearance to your light install. This switch is brand new, and has never been installed. $20

Genuine Light Bar. This is the bar that mounts to the front bumper/brush guard to mount two lights in front of the grille. It has some very minor bubbling near one end, but you can barely even see it. I tried to take pics of it, but it is hard to even get it to show up in pics. $50

Wiper Cable and Gearboxes. Used but in good working condition. $20/complete set

Both pictures are of the same AMR2631 Temp Gauge. As you can see in the pic with the fuel gauge, the mark in the lens is not too bad. The D110 Gauge looks identical, but the lens is in great shape.
Attached Thumbnails
Click image for larger version

Name:	Gauges.jpg
Views:	111
Size:	88.9 KB
ID:	16705   Click image for larger version

Name:	AMR2631.jpg
Views:	113
Size:	62.0 KB
ID:	16706  

Click image for larger version

Name:	Speedo.jpg
Views:	122
Size:	68.2 KB
ID:	16707   Click image for larger version

Name:	Light-Bar-01.jpg
Views:	110
Size:	134.3 KB
ID:	16708  

Click image for larger version

Name:	Light-Bar-02.jpg
Views:	141
Size:	109.2 KB
ID:	16709   Click image for larger version

Name:	Light-Bar-03.jpg
Views:	95
Size:	132.3 KB
ID:	16710  

Click image for larger version

Name:	Fog-Light-Switch.jpg
Views:	117
Size:	40.4 KB
ID:	16711  
__________________
"I have taken more good from alcohol than alcohol has taken from me." - Winston Churchill
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old December 4th, 2008, 01:03 PM
woldd90's Avatar
woldd90
Status: Offline
Scott
1997 D90 ST #1444
Site Team
 
Join Date: Aug 2005
Location: Georgia
Posts: 5,329
I am interested in the light bar... I will send you an email about this and the floor pans stuff.

Scott
__________________
Scott

Reply With Quote
  #3  
Old December 4th, 2008, 03:38 PM
Ren Ching's Avatar
Ren Ching
Status: Offline
Skinny Pete
'84 90 "Yamelo"/'88 RRC "Chewbacca"
Member
 
Join Date: Mar 2007
Location: Downtown
Posts: 4,696
Registry
does the wiper cable gearbox stuff come with the connecting pipes? if so I'll take it.
rgrds
dave

Quote:
Originally Posted by Stmpede
Ok, I still have some of the previous stuff, which can be found in this thread. Please make offers on any of that stuff. The worst I can say is no, but I need to move this stuff. Also, may be interested in trades for other parts. Let me hear what you've got...

Additionally, I have

A couple (2) fuel gauges available. $25/ea

Temp Gauge AMR2631 (the D90 one used to replace the 110 one). It has a small mark in the lens to the left of the temp symbol, but below the actual needle/gauge part. You should be able to see it in the pic. $25

NAS D110 Temp Gauge $10

KPH Speedo $10

Fog Light Switch. This is a rocker to fit the wiper motor cover and give a more factory appearance to your light install. This switch is brand new, and has never been installed. $20

Genuine Light Bar. This is the bar that mounts to the front bumper/brush guard to mount two lights in front of the grille. It has some very minor bubbling near one end, but you can barely even see it. I tried to take pics of it, but it is hard to even get it to show up in pics. $50

Wiper Cable and Gearboxes. Used but in good working condition. $20/complete set

Both pictures are of the same AMR2631 Temp Gauge. As you can see in the pic with the fuel gauge, the mark in the lens is not too bad. The D110 Gauge looks identical, but the lens is in great shape.
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old December 4th, 2008, 04:40 PM
TravelerBT's Avatar
TravelerBT
Status: Offline
Philip Marshall
none - :*(
Member
 
Join Date: Nov 2008
Location: Erie, colorado
Posts: 587
Registry
so what is the deal with replacing a speedometer? Would I need to take that to a shop so they can set the mileage? Or can I legally do that myself?
Reply With Quote
  #5  
Old December 4th, 2008, 04:40 PM
Stmpede's Avatar
Stmpede
Status: Offline
Andrew Najarian
'93 NAS D110 #43
Member
 
Join Date: Mar 2007
Location: Jacksonville, FL
Posts: 2,459
No, you reuse the pipes, it is just the cable that slides into the pipe and the two gear boxes.
__________________
"I have taken more good from alcohol than alcohol has taken from me." - Winston Churchill
Reply With Quote
  #6  
Old December 4th, 2008, 04:58 PM
NashvilleRover's Avatar
NashvilleRover
Status: Offline
Dendy Jarrett
2009 LR3- Well Built
Member
 
Join Date: Jun 2007
Location: Nashville, Tennessee - USA
Posts: 819
Andrew:
If Scott backs out on the light bar, I am interested.
Thanks
Dendy
Reply With Quote
  #7  
Old December 4th, 2008, 05:22 PM
Ren Ching's Avatar
Ren Ching
Status: Offline
Skinny Pete
'84 90 "Yamelo"/'88 RRC "Chewbacca"
Member
 
Join Date: Mar 2007
Location: Downtown
Posts: 4,696
Registry
10-4. I think I need the pipes for a RH to LHD conversion. pretty sure I can figure something out.

Thanks!
D

Quote:
Originally Posted by Stmpede
No, you reuse the pipes, it is just the cable that slides into the pipe and the two gear boxes.
Reply With Quote
  #8  
Old December 4th, 2008, 05:46 PM
matt L.
Status: Offline
matt lipetska
1995 D-90
Member
 
Join Date: Nov 2007
Location: Snohomish, WA
Posts: 10
Andrew:
Interested in light bar and light switch. PM sent
Thanks, Matt
Reply With Quote
  #9  
Old December 4th, 2008, 07:49 PM
moose's Avatar
moose
Status: Offline
Brett
Ex-Mod Tdi 110 Hard Top
Member
 
Join Date: Mar 2007
Location: Mississauga, ON Canada
Posts: 259
Registry
PM sent on the speedo.

Brett
__________________
Ex-Mod 110 Tdi
Series 3 88 Diesel Soft Top
Reply With Quote
  #10  
Old December 4th, 2008, 11:27 PM
Stmpede's Avatar
Stmpede
Status: Offline
Andrew Najarian
'93 NAS D110 #43
Member
 
Join Date: Mar 2007
Location: Jacksonville, FL
Posts: 2,459
Not sure about legality, but if you advance it to the correct mileage, you haven't done anything wrong, and who would know anyway right?

Follow-up Post:

DB, I don't see why, the one closest to the motor is the only one that I think even differs, but you could probably modify it yourself to fit the other side.
__________________
"I have taken more good from alcohol than alcohol has taken from me." - Winston Churchill
Reply With Quote
  #11  
Old January 11th, 2009, 12:28 PM
Stmpede's Avatar
Stmpede
Status: Offline
Andrew Najarian
'93 NAS D110 #43
Member
 
Join Date: Mar 2007
Location: Jacksonville, FL
Posts: 2,459
Bump

Speedo Sold
Light Bar Sold
Switch is pending payment

Gauges still available if anyone needs one...especially good for any of you adding another fuel tank so that you can have matching gauges.
__________________
"I have taken more good from alcohol than alcohol has taken from me." - Winston Churchill
Reply With Quote
  #12  
Old January 27th, 2009, 01:50 PM
Stmpede's Avatar
Stmpede
Status: Offline
Andrew Najarian
'93 NAS D110 #43
Member
 
Join Date: Mar 2007
Location: Jacksonville, FL
Posts: 2,459
bump, still available. Feel free to make offers. Also, I still have the front bumper and winch mount available. Bumper is perfect, just repainted. Mount is the orig. POE mount off NAS 110 and was modified to accomodate the x9 as well as the warn 8000.

Follow-up Post:

Forgot to mention. I also have a block heater (brand new, never installed) and receptacle for mounting the plug. I will get a picture later today, but both are brand new. My plan was to mount the receptacle so that you could plug in the cord without opening the hood, or having a plug dangling out of the grill or something. I found a couple stock photos, will take pics of the actual items tonight if need be.

How about $100 shipped to the 48 for both?
Attached Thumbnails
Click image for larger version

Name:	Bumper01.jpg
Views:	95
Size:	64.7 KB
ID:	17511   Click image for larger version

Name:	Bumper02.jpg
Views:	92
Size:	203.7 KB
ID:	17512  

Click image for larger version

Name:	Bumper03.jpg
Views:	88
Size:	93.7 KB
ID:	17513  
Attached Images
  
__________________
"I have taken more good from alcohol than alcohol has taken from me." - Winston Churchill
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Classifieds > For Sale - Parts

Tags
ac, fs, part, parts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
94 NAS Defender 90-P.O.E.(Port of Entry) 1 of 65 made! on EBAY SeanD-90 Misc. Chit-Chat 29 May 27th, 2017 08:14 AM
FS: Defender Workshop Manuals mpodgorski For Sale - Parts 4 May 31st, 2009 10:14 AM
Defender 110 Hi Cap Bed and Truck Cab FS SafariHP The Vendors Loft 2 April 14th, 2009 06:34 PM
FS: 1995 Beluga Black Defender mpodgorski Misc. Chit-Chat 9 May 23rd, 2004 02:45 PM
Maybe FS: 1999 Defender 110 Td5 mlepisto For Sale - Vehicles 3 March 18th, 2004 02:17 PM


All times are GMT -5. The time now is 09:31 PM.


Copyright