Defender, RRC and Series parts - Defender Source
Defender Source  

Go Back   Defender Source > Classifieds > For Sale - Parts


Reply
 
Thread Tools
  #1  
Old April 10th, 2012, 09:40 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
Defender, RRC and Series parts

4 Bilstein 7100 shocks with reservoirs, including top (rear) and bottom mounts from RTE. Fronts are RTE bottom mounts with modified shock towers to accept eyelets on top. The front top mounts are for EAS removed systems where the shock is in front of the spring.
These are the 14" long body and have a compressed length of a bit over 20". The above setup was for the RTE 5" lift. There is surface rust on one shock from rock hits. Valved 400/100 front and 360/80 rear... $450 for everything.
1 D90/110 Southdown axle protector (NLA). Matches up to the Southdown steering protector... $300
1 D90 front stock bumper $100
2 Jate Rings - both $60
4 Series door pulls - all for $50
1 Toyota dual fill, filler neck with pull switching. If you want dual tanks on your older long wheelbase Land Cruiser, you install this and pull the knob to determine into which tank the gas/diesel goes when you are filling. I don't think it will work on a stock LR vehicle. $100

Shipping additional.
If you are interested, please email me at clark.bowen@gmail.com
Attached Thumbnails
Click image for larger version

Name:	P1010499.jpg
Views:	165
Size:	106.5 KB
ID:	50146   Click image for larger version

Name:	P1010500.jpg
Views:	132
Size:	60.1 KB
ID:	50147  

__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old April 11th, 2012, 08:50 AM
red64chevelle
Status: Offline
Daniel Smith
86 110 300TDI,16 Disco Sport
Member
 
Join Date: Feb 2011
Location: East Greenwich, RI
Posts: 428
Registry
I would like the JATE rings. They would be shipped to 02816.

Thanks in advance.
Reply With Quote
  #3  
Old April 11th, 2012, 11:46 AM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
Daniel....
I'll ship them USPS for $5
Please PayPal me at clark.bowen@gmail.com and make sure your address is included.
I'll ship when I receive your payment.
If you don't have PayPal, we can do it with a check.

Clark
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old April 11th, 2012, 01:36 PM
red64chevelle
Status: Offline
Daniel Smith
86 110 300TDI,16 Disco Sport
Member
 
Join Date: Feb 2011
Location: East Greenwich, RI
Posts: 428
Registry
Money sent via PayPal.
Reply With Quote
  #5  
Old April 11th, 2012, 07:28 PM
xplorUtah's Avatar
xplorUtah
Status: Online
Andrew P
1960 SII
Member
 
Join Date: Jul 2010
Location: Park City, UT
Posts: 1,136
Registry
Interested in the Toyota dual filler. Email sent for pics.
__________________
1960 Series II "Pliny"
1997 D90 SW #2496

"Fear profits man nothing"

1997 D90 SW #2139 Portofino Sold
1995 D90 ST #2445 Beluga Black Sold
1995 RRC SWB Beluga Black Sold
1986 110 200TDI "1 of 1" Sold
Reply With Quote
  #6  
Old April 11th, 2012, 09:28 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
This is an updated list:

4 Bilstein 7100 shocks with reservoirs, including top (rear) and bottom mounts from RTE. Fronts are RTE bottom mounts with modified shock towers to accept eyelets on top. The front top mounts are for EAS removed systems where the shock is in front of the spring. You can use them with any eyelet mounting system such as RTE-fabs adjustable units.
These are the 14" long body and have a compressed length of a bit over 20". The above setup was for the RTE 5" lift. There is surface rust on one shock from rock hits. Valved 400/100 front and 360/80 rear... $450 for everything.
1 D90/110 Southdown axle protector (NLA). Matches up to the Southdown steering protector... $300
1 D90 front stock bumper $100
4 Series door pulls - all for $50
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
  #7  
Old April 12th, 2012, 12:27 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
The Southdown axle protector IS available from Atlantic British for $450 and it looks like it is for a Discovery 2. I'm not sure what I have so I'll remove it until I know for sure.
Did lower Bilsteins to $400, however
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
  #8  
Old April 14th, 2012, 08:33 PM
hoxie173's Avatar
hoxie173
Status: Offline
Matt Hawkes
1959 S2
Member
 
Join Date: Mar 2012
Location: Maine United States
Posts: 142
Licked (shock absorbers and mounts front and rear)
Reply With Quote
  #9  
Old April 15th, 2012, 01:07 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
Matt.....

I'll calculate the shipping costs and give you a final figure.
PayPal ok?

Clark
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
  #10  
Old April 15th, 2012, 02:47 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
Matt....

Sent you an email with shipping costs and payment instructions.

Thanks,

Clark
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
  #11  
Old April 15th, 2012, 09:55 PM
cdb
Status: Offline
Clark Bowen
1969 Series 2a/OM617 Bugeye 88"
Member
 
Join Date: Jun 2006
Location: Oregon, USA
Posts: 775
Bilsteins are gone.

Southdown front axle guard for RRCs and Discovery 1 is available.
Here is Paul Grant's original writeup:


There are no unusual cuts, dents or disformations anywhere on these guards.

The front guard will come with two massive mounting brackets that are secured using the bolts from the front radius arms. They support the guard itself with four bolts per side. The guard is heavy galvanized steel that's at least 1/4 inch thick. The same can be said of the rear diff guard as well. It's galvanized with stainless steel bolts and is the same thickness.

These are NLA (Roverparts.com does show this guard for D2s, D90/110s, P38s , but not the RRC or D1).

$325 including shipping in continental US.
__________________
2011 RR HSE -
1970 LR Series 2A Bugeye BenzOver
2001 GMC 2500 4wd
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Classifieds > For Sale - Parts

Tags
part, parts, series

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
NATO Black RRC, one more time RedRhinoProducts For Sale - Vehicles 38 May 29th, 2014 04:33 PM
DI RRC Defender Diff Guards Cheap!!! Paul Grant For Sale - Parts 4 September 2nd, 2011 02:21 AM
mostly New Series Parts for sale SafariHP For Sale - Parts 0 July 24th, 2007 09:45 AM
The Great Parts Purge of 2006 evilfij For Sale - Parts 5 June 5th, 2006 04:27 PM
Series III/RRC parts Art Vigil Wanted 0 September 14th, 2005 07:20 PM


All times are GMT -5. The time now is 06:40 PM.


Copyright