It is in pieces currently- sides, rear door, and top.
I have had a couple pm's, and here was my plan:
-modifiy to emulate the fiberglass top by cutting a section out of the mating flange at the s/t cage hoops, or
-remove the s/t cage above the capping while the h/t is on, like a ROW truck.
I had planned to cut the mating flange to allow use with the cage just like the fiberglass removable top. A very easy job, and then a lifetime fix instead of dealing with a failing fiberglass top. I am 90 less, and am building a 130, then a s/t 110, so no need for these pieces.