Defender Source Forum banner

Stubbed... stub axle bearings and seal

Tags
axle
1K views 2 replies 2 participants last post by  thewap 
#1 ·
How do you guys in the field remove the bronze bushing, needle bearings, and seal from the stub axle, without the special tool?
 
#2 ·
you do not have to remove the bronze bush. Just the needle bearing... You need a slap hammer with jaws on it to bang it out. THen the seal comes out the same way.. stop by your local repair shop with the spindles. THey can do it if you do not have the tool. Takes 5 minutes..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top