Defender Source Forum banner

NAS 110 photos of stock rear speaker housing

Tags
110 nas nas 110
999 views 3 replies 2 participants last post by  Lesandjes 
#1 ·
Looking for some photos if anyone can post them, of the stock rear speaker housing from a NAS 110.

It's a different configuration than the 90, as the roll cage goes through the side of the rear fender, and then through the tub floor. The panel has to go around that somehow.

Looking to see how that panel fits. All the NAS 110's around here have aftermarket setups. Trying to find out what was stock.

Thanks!
 
#4 · (Edited)
Exactly - thats all there is. The rest of the enclosure is recessed under the body capping and behind the rear door jamb so thats all you need to mount and box in the speaker. Like others I replaced this with a custom-built enclosure to hold a bigger 6x9 speaker and the DS box also houses my small ARB for the air locker. Thats harder to build because you have to make it bigger and then work around the roll bar and such. The stock one pictured above doesn't have to deal with any of that because it so small.

AndrewT
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top