1997 Oil Cooler Lines PARTS - Defender Source
Defender Source  

Go Back   Defender Source > Defender & Series Technical Discussions > Defender Technical Discussions


Reply
 
Thread Tools
  #1  
Old July 30th, 2007, 01:24 PM
pcscharfe
Status: Offline
pcdefender
D90/NAS 110
Member
 
Join Date: Nov 2005
Location: Santa Monica, CA, US
Posts: 391
Lightbulb 1997 Oil Cooler Lines PARTS

Recently placed an order from Marty at British Pacific to replace the oil cooler lines on my 1997 D90 ST. I thought I would post the part numbers for easy reference. It turns out the replacement o-rings were already included on the new lines, so they are not necessary. Pic attached here for reference.

1997 owners please post your experiences if you have any heads-up tips before my install.

I plan to wrap the lines with heat shield prior to install, but still searching for a source.

Subtotal from British Pacific for lines and extra o-rings = $118.00 ($40.00 less than Atlantic British)

Lines
PBP101150 (Upper, Engine to Cooler) $49.00
PBP101160 (Lower, Cooler to Engine) $45.00

Replacement O-Rings
ESR1594L (4) $2.50 each
ESR3098 (1) $1.50

Thanks,

Paul
Attached Thumbnails
Click image for larger version

Name:	97D90Oilcoolerlines.jpg
Views:	160
Size:	232.2 KB
ID:	9900  
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old July 30th, 2007, 06:36 PM
Helihntr
Status: Offline
Hunter Seley
Member
 
Join Date: Dec 2004
Location: Wellington, FL, USA
Posts: 12
Aeroquip has aviation grade heat shield tubing that fits nicely over the lines and looks real nice...
Reply With Quote
  #3  
Old July 31st, 2007, 02:32 PM
flynn23
Status: Offline
Scott Kozicki
97 NAS D90 SW
Member
 
Join Date: Dec 2006
Location: Nashvegas, TN
Posts: 36
Just curious, are these hard line all the way or are the middle bits some kind of flex tubing? I was thinking about using braided lines for this but I'd rather use hard lines if they make a pre-bent kit. Thanks for the part numbers regardless. That's a great service to the forum.
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old July 31st, 2007, 03:14 PM
woldd90's Avatar
woldd90
Status: Offline
Scott
1997 D90 ST #1444
Site Team
 
Join Date: Aug 2005
Location: Georgia
Posts: 5,329
Quote:
Originally Posted by flynn23
Just curious, are these hard line all the way or are the middle bits some kind of flex tubing? I was thinking about using braided lines for this but I'd rather use hard lines if they make a pre-bent kit. Thanks for the part numbers regardless. That's a great service to the forum.
The middle is a rubber hose, so, braided lines would be a good move.
__________________
Scott

Reply With Quote
  #5  
Old July 31st, 2007, 07:02 PM
Firefighter2904's Avatar
Firefighter2904
Status: Offline
jason
97 d-90
Member
 
Join Date: Jun 2007
Location: NH
Posts: 124
is anyone out there making a replacement oil line in ss braided, that i wouldnt have to have custom made.


I know ecr has some but not for 97's
Reply With Quote
  #6  
Old July 31st, 2007, 07:40 PM
pcscharfe
Status: Offline
pcdefender
D90/NAS 110
Member
 
Join Date: Nov 2005
Location: Santa Monica, CA, US
Posts: 391
Thumbs up

I searched pretty hard but never found a kit for the 1997... I really wanted a bomb-proof solution like the kits from these guys, but no one seems to offer them for the 1997:

(pleanty of threads in this forum for each of these options for all but 1997)

Rover Accessories http://www.defendersource.com/forum/...61&postcount=9
ECR http://www.eastcoastrover.com/110oillines.html
Trailhead 4x4 http://www.trailhead4x4.com/18401.html

Eventually I decided that I better act before my truck went up in flames. I am pretty happy with the idea of a fresh set of factory lines wrapped in thermal tape or a thermal sleeve. At least if the lines fail, the thermal tape will keep the oil from spraying the engine and catching fire.

I even saved some money so I could buy a sexy new fire extinquisher...
Reply With Quote
  #7  
Old July 31st, 2007, 09:15 PM
Firefighter2904's Avatar
Firefighter2904
Status: Offline
jason
97 d-90
Member
 
Join Date: Jun 2007
Location: NH
Posts: 124
Well we both had the same idea, when I got a quote from ECR they said they didnt have a kit for the 97's and they would use factory lines.

so apparently I will be using factory lines too, I like the idea of that heat shield tubing that aeroquip has. Will definetly protect them and keep oil contained if it does spring a leak.
Reply With Quote
  #8  
Old July 31st, 2007, 09:37 PM
woldd90's Avatar
woldd90
Status: Offline
Scott
1997 D90 ST #1444
Site Team
 
Join Date: Aug 2005
Location: Georgia
Posts: 5,329
Take off your old lines and have them redone... You could probably call a few speed shops to find someone to replace the lines with a stainless steel braided hose.
__________________
Scott

Reply With Quote
  #9  
Old November 5th, 2007, 07:00 PM
hartman
Status: Offline
Edward Hartman
1997 D-90
Member
 
Join Date: Nov 2006
Location: Courtland, Virginia, USA
Posts: 139
Tag for later
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Defender & Series Technical Discussions > Defender Technical Discussions

Tags
1997, 97, part, parts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front drive line, oil cooler lines, speaker boxes oldscratchggf For Sale - Parts 4 February 17th, 2006 12:19 PM
oil cooler lines CHRIS C Defender Technical Discussions 39 December 21st, 2004 11:30 PM
Oil Info XD90 Defender Technical Discussions 5 September 7th, 2004 10:07 PM
Oil cooler lines revisited rover4x4 Defender Technical Discussions 5 July 9th, 2004 08:40 AM
Stainless Oil cooler lines??? Neo Defender Technical Discussions 3 February 3rd, 2004 08:04 PM


All times are GMT -5. The time now is 11:16 AM.


Copyright