Huge NOS and take off parts stash Series and NAS Defender - Defender Source
Defender Source  

Go Back   Defender Source > Classifieds > The Vendors Loft


Reply
 
Thread Tools
  #1  
Old May 26th, 2016, 10:31 AM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Huge NOS and take off parts stash Series and NAS Defender

We have recently sold our building in Warren (the old shop). This meant we had to clean it out of the parts we had been hoarding starting in about 1993. We found the easiest way to do this was to sell it in bulk to Rovers North. We aren't set up for shipping or mail order, but they are.
The first trailer load of parts has now be delivered to Rovers North. There are NAS Defender and Series Rover parts (and a few RRC parts). If you are doing a true SIIA restoration we just sent them a batch of NOS Genuine fenders, body sides, pick up tops, etc. etc. If you are putting your Defender together there are tubs, fuel tanks, doors, original wheel flares, seats, NAS 110 rims, roof baskets, etc etc.
80% of what we sent over in the first trailer load are all parts that are NLA (no longer available). These are parts we have had in indoor storage since the 1990s and most haven't been available new for many years.
It is my guess that there will be at least 1 more trailer load of parts that we will hopefully get over to RN later in the Summer. That will be NOS small stuff like Series lenses, gauges, mechanical parts, etc.
So if you are looking for hard to find stuff call Rovers North because when this stuff is gone, it is gone for good.
Sorry for the shameless advertising, but I wanted to get the word out so these parts get to the folks doing restorations that need them.

(The trailer was full to the top once we got everything in there. The photo is just a sample)
Attached Thumbnails
Click image for larger version

Name:	i-d3PPHCb-L.jpg
Views:	203
Size:	90.6 KB
ID:	150299  
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old May 26th, 2016, 10:38 AM
Brentflyfish's Avatar
Brentflyfish
Status: Offline
Brent McDonald
1988 LHD 110 SW
Member
 
Join Date: Jan 2015
Location: Nashville, TN
Posts: 600
Registry
Any list of parts for a 95 RRC?
Reply With Quote
  #3  
Old May 26th, 2016, 10:39 AM
1of40's Avatar
1of40
Status: Offline
1of40
NAS 97SW & 83 One Ten Tdi
Member
 
Join Date: Dec 2003
Location: Potomac Falls & Wintergreen, Virginia
Posts: 6,085
Registry
Poor Zack
Reply With Quote
Sponsored Links
Advertisement
 
  #4  
Old May 26th, 2016, 10:43 AM
phoenix37's Avatar
phoenix37
Status: Offline
john
97 D90 ST / 1957 S1 109/ 1983 LS110
Member
 
Join Date: Feb 2008
Location: Venice, CA/Yarmouth,ME
Posts: 5,791
Registry
Zack pm sent on the 110 wheels...In the meantime if there is a near perfect Series pick up cab top someone should think about using it as a mold to create fiberglass ones. Anytime you see one it looks like it lived its life on a driving range. I had a near perfect one I sold to a guy that was going to build fiberglass reproductions and he disappeared as soon as i sold it to him....oh well. Hope there is someone out there that will consider making them.
Reply With Quote
  #5  
Old May 26th, 2016, 10:43 AM
Brentflyfish's Avatar
Brentflyfish
Status: Offline
Brent McDonald
1988 LHD 110 SW
Member
 
Join Date: Jan 2015
Location: Nashville, TN
Posts: 600
Registry
Yeah, we are about to blow up his inbox.
Reply With Quote
  #6  
Old May 26th, 2016, 10:46 AM
javelinadave
Status: Offline
-
-
Member
 
Join Date: Sep 2003
Location: -
Posts: 5,394
Quote:
Originally Posted by 1of40 View Post
Poor Zack
Quote:
Originally Posted by Brentflyfish View Post
Yeah, we are about to blow up his inbox.
Based on his Instagram and Facebook photos he has nothing better to do than answer phones and fine new homes for LR parts.
Reply With Quote
  #7  
Old May 26th, 2016, 10:51 AM
Z.G's Avatar
Z.G
Status: Offline
Zack
300Tdi 95 D1
Member
 
Join Date: May 2013
Location: Burlington, VT
Posts: 4,684
Registry
.....
Reply With Quote
  #8  
Old May 26th, 2016, 10:51 AM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by Brentflyfish View Post
Any list of parts for a 95 RRC?
The is a rear SWB door and some door skins and a new headliner SWB, but not much else RRC.

------ Follow up post added May 26th, 2016 10:52 AM ------

Quote:
Originally Posted by 1of40 View Post
Poor Zack
Agreed!!!
One of the many reasons I never wanted to be in the mail order business.

------ Follow up post added May 26th, 2016 10:53 AM ------

Quote:
Originally Posted by phoenix37 View Post
Zack pm sent on the 110 wheels...In the meantime if there is a near perfect Series pick up cab top someone should think about using it as a mold to create fiberglass ones. Anytime you see one it looks like it lived its life on a driving range. I had a near perfect one I sold to a guy that was going to build fiberglass reproductions and he disappeared as soon as i sold it to him....oh well. Hope there is someone out there that will consider making them.
There is a NOS Series pick up roof. Not sure what the plans for it are though.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #9  
Old May 26th, 2016, 11:45 AM
Rocky's Avatar
Rocky
Status: Online
Chris
72 + D1 drivetrain
Member
 
Join Date: Sep 2006
Location: Colonies Aka Boston
Posts: 8,789
Lots of roof racks for those SD fans!
Reply With Quote
  #10  
Old May 26th, 2016, 12:03 PM
Z.G's Avatar
Z.G
Status: Offline
Zack
300Tdi 95 D1
Member
 
Join Date: May 2013
Location: Burlington, VT
Posts: 4,684
Registry
Well this has made for a busy morning.....

If everyone can wait a week or two so we can catalog everything, bring them on hand, etc. Most of the items are not being stored within the building, so I cannot walk around and look at the products. When the items are on the website, all will be made clear, thank you for your patience!
Reply With Quote
  #11  
Old May 26th, 2016, 12:31 PM
JohnsD90's Avatar
JohnsD90
Status: Offline
John
74 SIII 88", 88 110, 91 110
Member
 
Join Date: Feb 2009
Location: CT
Posts: 2,282
Registry
Quote:
Originally Posted by Z.G View Post
Well this has made for a busy morning.....

If everyone can wait a week or two so we can catalog everything, bring them on hand, etc. Most of the items are not being stored within the building, so I cannot walk around and look at the products. When the items are on the website, all will be made clear, thank you for your patience!
I Need NADA Series 3 Tail lamps.
Reply With Quote
  #12  
Old May 26th, 2016, 12:44 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by JohnsD90 View Post
I Need NADA Series 3 Tail lamps.
Those will be in the next batch that heads to RN in the next couple of months.
We sent big stuff this time.
I still need to sort all the Series little parts and that is going to take some time as I just got out of ACL replacement surgery yesterday.

So hold on for the smaller items and give RN a couple weeks on this load so they can organize it.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #13  
Old May 26th, 2016, 01:00 PM
9tea
Status: Offline
Les Parker
79 Air Portable
Member
 
Join Date: Aug 2007
Location: S Burlington VT
Posts: 33
Lots of good stuff to circulate around the community. Thanks for the peep into Aladdin's cave !
Reply With Quote
  #14  
Old May 27th, 2016, 05:25 PM
Ren Ching's Avatar
Ren Ching
Status: Offline
Skinny Pete
'84 90 "Yamelo"/'88 RRC "Chewbacca"
Member
 
Join Date: Mar 2007
Location: Downtown
Posts: 4,696
Registry
Quote:
Originally Posted by 9tea View Post
Thanks for the peep into Aladdin's cave
Don't you mean, Les' Loft?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Present:
1960 SII 109"- "Red Square"
1984 90 Tdi- "Yamelo"
1988 RRC- "Chewbacca"
1987 RRC- "Chewy 2"
2008 RRS SC- "The Supersofa"

Past:
1959 SII 88"- "The Little Green Beastie" last seen in NY
1972 SIII 88"- "GreenHELL" now in NC
1988 90 "Eric the Half a Bee" half a truck, sold for parts
1991 RRC- never got a name- long since recycled
Reply With Quote
  #15  
Old May 27th, 2016, 06:22 PM
MUDSUX's Avatar
MUDSUX
Status: Offline
Forrest
Like my Tatas?
Member
 
Join Date: Jul 2009
Location: Orlando, Fl. US
Posts: 1,641
Registry
Quote:
Originally Posted by Z.G View Post
Well this has made for a busy morning.....

If everyone can wait a week or two so we can catalog everything, bring them on hand, etc. Most of the items are not being stored within the building, so I cannot walk around and look at the products. When the items are on the website, all will be made clear, thank you for your patience!
Man if you have any Series 1 parts please let me know!
__________________
MUDSUX

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

"It is the soldier, who salutes the flag, who serves beneath the flag, and whose coffin is draped by the flag that allows the protester to burn the flag"
Reply With Quote
  #16  
Old May 27th, 2016, 08:52 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by MUDSUX View Post
Man if you have any Series 1 parts please let me know!
We sent no Series I parts at all.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #17  
Old May 27th, 2016, 09:56 PM
dlee888
Status: Offline
Davie Lee
1997 D90 Soft Top
Member
 
Join Date: Dec 2006
Location: Chino Hills, CA
Posts: 139
Looking for this brush bar... any NTO's in the trailer?

Reply With Quote
  #18  
Old May 28th, 2016, 06:57 PM
roverguy's Avatar
roverguy
Status: Offline
Robert
1995 RRC
Member
 
Join Date: Apr 2010
Location: Nashville, TN
Posts: 1,029
Registry
Quote:
Originally Posted by dlee888 View Post
Looking for this brush bar... any NTO's in the trailer?
I had one of those sitting in my basement for years and then I gave it away... 😕
__________________
1965 IIa 88
1995 RRC 25th Anniversary
98 Discovery LE7
2000 DII (SOLD)
Reply With Quote
  #19  
Old May 28th, 2016, 08:01 PM
ECR's Avatar
ECR
Status: Offline
East Coast Rover Co.
Just Defenders, nothing else.
D-90 Source Vendor
 
Join Date: May 2006
Location: Rockland, ME, USA
Posts: 4,614
Quote:
Originally Posted by dlee888 View Post
Looking for this brush bar... any NTO's in the trailer?
No new brush bars went.
Some used ones went. Check with Rovers North in a few weeks.
__________________
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

I do not check PMs. Call or email if you need something.

ECR is not a parts source. We are not in the mail order business.
Reply With Quote
  #20  
Old May 28th, 2016, 10:47 PM
rover4x4's Avatar
rover4x4
Status: Offline
Phillip
1995 SW #487/500
Member
 
Join Date: Sep 2003
Location: The Old North State
Posts: 7,526
Registry
I'll sell one of those brush bars for 46k. I'll throw in #487 pho free.
__________________
Poor gas mileage gets you to the best places on earth
Reply With Quote
Reply

Lower Navigation
Go Back   Defender Source > Classifieds > The Vendors Loft

Tags
defender, nas, part, parts, series

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
NOS Huge 8" Round fogs inka2002ii For Sale - Parts 0 April 1st, 2016 11:11 AM
Take Off Parts, New Take Off Parts & parts from GLR globallandrovers The Vendors Loft 0 September 22nd, 2015 03:07 PM
Not mine: CL ad in Philly selling massive stash of parts Rocky The Flea Market 15 June 24th, 2015 03:02 PM
Huge Parts Purge ron For Sale - Parts 79 April 30th, 2014 02:05 PM
Defender (and Series?) Rear Tailgate (new take-off). pmd For Sale - Parts 1 February 10th, 2012 12:35 PM


All times are GMT -5. The time now is 02:01 AM.


Copyright